The chain grate boiler is a grated fired boiler with a high degree
of mechanization, the chain grate is the combustion equipment. The working principle is to drive the chain
grate to rotate by the reducer, so that the solid fuel can be fired from the front to the end of the boiler,
and the combustion efficiency is greatly improved compared with the fixed grate. When the chain is turned to
the bottom, the air cooling lower the temperature, which can protect the grates from burning loss.
Compared with gas-fired boilers, chain grate boilers do not require
pipe laying. Moreover, its system is simpler, the cost are relatively low, but there are certain defects.
Firstly, chain grate boilers cannot achieve desulfurization in the furnace, and SOx and NOx carried in the
flue gas will cause pollution to the atmosphere. Secondly, the solid fuel particles used by the chain grate
boiler are in different size and the combustion is insufficient, resulting in a generally low thermal
efficiency.
ZOZEN technicians optimized the design of the feeding hopper, the length and width of the fire grate, the rotary speed of gearbox, the primary and second air ratio, the position and direction of the secondary air, etc. to ensure efficient and stable operation of the biomass-fired chain grate boilers.
Thermal capacity: | 2 -40 tph (steam); 1.4 - 17.5MW (hot water) |
Working pressure: | 1- 2.5 Mpa |
Thermal efficiency: | Above 87.5% |
Recommended boilers: | DZL series/SZL series |
Applicable fuel: | Biomass particles, palm shell, wood chips, straw, rice husk, etc. |
ZOZEN coal-fired chain grate boilers realize mechanization of fuel feed, ash discharge and slagging. They adopt the unique grate to ensure smooth running; the combustion air system (stoke) adopts independent compartment and scientific sealing structure; reasonable air conditioning device improves combustion efficiency.
Thermal capacity: | 2 -75 tph (steam); 2.8 - 116MW (hot water) |
Working pressure: | 1.0 - 2.5 MPa |
Thermal efficiency: | Above 82% |
Recommended boilers: | DHL series/SZL series |
Applicable fuel: | Bituminous coal, anthracite, lignite, lean coal, etc. |
The ZOZEN chain grate boiler has been set up different numbers of separate wind barns according to the different capacities of boilers, so that the air distribution can be adjusted on each combustion phase to ensure the full combustion of fuel.
Ensure the boiler feed water quality, improve the installation and maintenance quality of the steam-water separation device, keep the boiler load, water level, steam pressure and other parameters stable during operation.
It is very important to clean the outer surface of the heating surface, the scale on the inner surface and the dust that blocks the flue. The combustion efficiency of the boiler will naturally increase if the heating surface is clean.
WhatsApp: +86 18861589035
WeChat: +86 13506150756
Live Chat