YQ(Y)W series gas-fired/oil-fired horizontal thermal oil heater
| Product thermal capacity: | 1400-14000 KW |
| Working pressure: | 0.8-1.0 MPA |
| Outlet temperature: | 320 °C |
| Available fuel: | Natural gas, coke oven gas, biogas, heavy oil, diesel oil, light oil, etc. |
| Available industries: | Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries |
YQ(Y)W series gas-fired/oil-fired thermal oil boilers have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.
This type of heater is delivered as a whole, and is installed on site, it only needs to connect thermal gas(oil) piping and electricity to start operation. The heater has four heating areas: furnace radiation heating area, the first convection tube bundle heating area, the second convection tube bundle heating area and economizer (waste heat boiler).
- The laying-off of steel tube adopts CNC 3D laser cutting machine.
-
The manufacture of round coil tube adopts CNC coil tube automatic production line. Once-forming and no need for plastic .
-
The tube butt adopts argon arc welding technique and the seams will be done x ray real-time imaging, preventing unqualified seams from entering coil production line .
-
Heater is wholly assembled before delivery, it is easy for installation, debugging and operating.
-
Fully automatic operating, burning, liquid level of high level tank, outlet temperature and flow rate are adjusted automatically and self-protected.
-
The inlet and outlet with end flanges and flanged cover structure facilitate the installation and layout of tubeline in boiler house.
-
Internal side adopts good insulation material, outside uses stainless steel plate, which can mostly reduce heat lost and make working environment better.
-
Multilayers closely spaced tube bundle and steel rod is used to seal and fix, completely eradicating short circuit of flue gas.
- Before delivery, the residue moisture is removed completely, so the system draining period is reduced to 2 days from 12 days.
-
The inner coil tube has bigger flow rate, so it is more stable under high temperature operation.
-
Conical coil effectively protects the furnace wall at the end of heater and burner on the top.
| Model | Rated thermal power (KW) | Rated thermal power (x104kcal/h) | Design working temperature(≤℃) | Rated working pressure(MPa) | Thermal efficiency (≥%) | System installation power(KW) | Maximum transport size(m) (L×W×H) |
| YQW-1400 Y(Q) | 1400 | 120 | 320 | 0.8 | 95 | 35 | 4.3×2.0×2.6 |
| YQW-1800 Y(Q) | 1800 | 160 | 320 | 0.8 | 95 | 56 | 4.9×2.2×2.6 |
| YQW-2400 Y(Q) | 2400 | 200 | 320 | 0.8 | 95 | 56 | 5.3×2.5×3.0 |
| YQW-2800 Y(Q) | 2800 | 240 | 320 | 0.8 | 95 | 66 | 6.1×2.5×3.0 |
| YQW-3500 Y(Q) | 3500 | 300 | 320 | 0.8 | 95 | 75 | 6.7×2.6×3.0 |
| YQW-4200Q | 4200 | 360 | 320 | 0.8 | 95 | 95 | 6.9×2.7×3.2 |
| YQW-4600Q | 4600 | 400 | 320 | 0.8 | 95 | 95 | 7.0×2.9×3.4 |
| YQW-6000Q | 6000 | 500 | 320 | 0.8 | 95 | 140 | 7.2×3.3×3.9 |
| YQW-7000Q | 7000 | 600 | 320 | 0.8 | 95 | 140 | 8.0×3.6×4.0 |
| YQW-8200Q | 8200 | 700 | 320 | 0.8 | 95 | 140 | 8.5×3.7×4.0 |
| YQW-9400Q | 9400 | 800 | 320 | 1 | 95 | 200 | 9.5×3.8×4.0 |
| YQW-10500Q | 10500 | 900 | 320 | 1 | 95 | 200 | 10.5×3.8×4.0 |
| YQW-12000Q | 12000 | 1000 | 320 | 1 | 95 | 240 | 12.4×3.8×4.0 |
| YQW-14000Q | 14000 | 1200 | 320 | 1 | 95 | 300 | 13.5.×4.0×4.2 |
* The above basic parameter table is for your reference, ZOZEN Boiler can customize the suitable boiler device and system solution based on your actual condition.
* All specifications and descriptions provided herein may be different from the actual specifications and descriptions for the product. ZOZEN Boiler reserves the right to make changes to this document and the product described herein, at anytime, without obligation on ZOZEN Boiler to provide notification of such change.
-
6 MW YQW thermal oil heater for chemical industryDanyang Auxiliary Chemical Co., Ltd. is located in the Yangtze River Delta Economic Zone of China, in Huangtang Town, Danyang City, Jiangsu Province. ...
-
8.2 MW YY(Q)W thermal oil for chemical factoryHenan Gongyi Fuda Water Purification Material Co., Ltd. is a professional manufacturer of high -efficiency water purifier---polyaluminum chloride, wit...
-
14 MW YQW thermal oil heater for edible oil refineryShandong Luhua Group Co., Ltd. is a large-scale private enterprise and a key leading enterprise of agricultural industrialization. It has 24 productio...
Steam -
Email
-
Tel
0086-510-68530299
Chat online
-
01Understanding you needs
First, you can communicate with our professional boiler consultant through email, telephone, form or online chat.
Here are some questions to know about you，eg：
1. what are your energy types and energy saving requirements?
2. the use of your boiler environment?
3. what do you ask for the power of the boiler?
4. what are you facing at the moment? -
02Make your solution
Next, according to your needs and conditions of use, we will provide
energy saving and reliable boiler system solutions.
——“ Let your boiler operate more efficiently and economically” -
03Keep your business on track
We will regularly communicate with you to understand your boiler operation and guide according to your needs. If you have other needs, we will provide you with the first time. Include：
Parts
Debugging
Installation
Repairing
Maintaining
Train
