ZOZEN Boiler has an advanced membrane wall production line, and the membrane wall tube arrangement is an important working procedure after the membrane wall is put into production. After the membrane wall is welded, it will be made into various shapes by the draw bench machine.
The large-scale fiber laser cutting machine being developed by ZOZEN Boiler is similar to the existing plasma cutting machine, and has the characteristics of high precision, good repeatability, numerical control programming and so on. Besides, it has the advantages of faster processing speed and higher precision. The accuracy of cutting steel plates can be controlled within 1 mm, which effectively improves the welding and assembly quality of boilers.
ZOZEN Boiler owns 12 production workshops. The advanced production line was equipped with the high degree of CNC and automation. ZOZEN CNC cutting machine can achieve high-speed and fine cutting.
ZOZEN DZL series boiler can use both biomass and coal as fuel. The dual fuel adaptability would help users to save fuel costs. It adopts three-pass water and fire tube design and can be equipped with economizer and duster cleaner to ensure the combustion efficiency, which can effectively lower the NOx emission. Please kindly click the chat online to get more information.
Among many boiler types, biomass-fired chain grate boiler has the advantages of wide fuel adaptability, low original emission concentration, low operating costs and easy operation. Based on the eco-friendly development thinking, ZOZEN Boiler has long been designing and manufacturing the chain grate boilers. At present, the DZL series industrial boiler adopts the advanced arch design, independently developed membrane water-cooled wall structure, special slag removal technology and reasonable sealing grate structure, which shows an obvious performance advantage.
The packaged structure is another characteristic of ZOZEN boiler. After the gas/oil-fired thermal oil heater is delivered to the project site, it can be put into use only by connecting the gas/oil, electricity, which can save a lot of installation costs. What's more, the boiler has the patented equipment to completely remove the moisture from the thermal oil heater after the hydraulic pressure test and reduce the oil dewatering time. Take the 6 million kcal as an example, it usually takes 10 days for oil dewatering while ZOZEN only needs 2 days, which reduces the 80% time for dewatering and directly save the costs for about 30,000 RMB.
This is ZOZEN thermal oil heater adopts the multi-circuit coil design with sufficient heating surface and good heat transfer effect which effectively protect the burner and furnace wall. The boiler adopts high-quality refractory and thermal insulation materials which can well reduce the heat loss based on the different refractory and thermal insulation structure for areas with different temperatures. In addition, based on the actual conditions, we also add the waste heat boiler, economizer, air pre-heater and other energy-saving equipment to make exhaust gas temperature to less than 90℃ and the thermal efficiency to reach over 95% and to help the enterprise reduce consumption and the costs.
The new generation of SZL series boiler is cooperated with Shanghai Jiaotong University. It increases the furnace height, increases rotating speed, adds ash blowing device and designs ash removal system at the bottom of the grate. These well solve problems like scaling, abrasion, front arch, etc. It can also reduce the maintenance and operating costs and extend the service life of the biomass-fired boilers.
