The packaged structure is another characteristic of ZOZEN boiler. After the gas/oil-fired thermal oil heater is delivered to the project site, it can be put into use only by connecting the gas/oil, electricity, which can save a lot of installation costs. What's more, the boiler has the patented equipment to completely remove the moisture from the thermal oil heater after the hydraulic pressure test and reduce the oil dewatering time. Take the 6 million kcal as an example, it usually takes 10 days for oil dewatering while ZOZEN only needs 2 days, which reduces the 80% time for dewatering and directly save the costs for about 30,000 RMB.
This is ZOZEN thermal oil heater adopts the multi-circuit coil design with sufficient heating surface and good heat transfer effect which effectively protect the burner and furnace wall. The boiler adopts high-quality refractory and thermal insulation materials which can well reduce the heat loss based on the different refractory and thermal insulation structure for areas with different temperatures. In addition, based on the actual conditions, we also add the waste heat boiler, economizer, air pre-heater and other energy-saving equipment to make exhaust gas temperature to less than 90℃ and the thermal efficiency to reach over 95% and to help the enterprise reduce consumption and the costs.
This is gas-fired/oil-fired thermal oil heater from ZOZEN Boiler which is widely used in petroleum, chemical fiber, pharmaceutical, printing and dyeing and other industries that require high-temperature heating. The thermal oil heater adopts heat medium oil to transfer the heat energy. Applying high temperature of heat medium oil, the boiler can realize low pressure and high temperature heating with a working temperature of 320℃. Meanwhile, our thermal oil heater is equipped with the complete device for operation control and safety supervision which can precisely control the working temperature with convenient operation and high safety performance.
The new generation of SZL series boiler is cooperated with Shanghai Jiaotong University. It increases the furnace height, increases rotating speed, adds ash blowing device and designs ash removal system at the bottom of the grate. These well solve problems like scaling, abrasion, front arch, etc. It can also reduce the maintenance and operating costs and extend the service life of the biomass-fired boilers.
Binzhou Xinkeode Technology Co., Ltd. is a private enterprise engaged in the production and sales of neopentyl glycol, sodium formate and formaldehyde. According to the actual situation of Xinkeode’s production lines, ZOZEN Boiler recommended the SZS series gas-fired condensing boiler. This series of steam boiler adopts the large furnace design and advanced burner, which can ensure the sufficient combustion of fuel to improve the fuel use ratio. With the energy-saving equipment at the end of the gas duct, the boiler thermal efficiency can reach 98% and above to save the operating costs.
ZOZEN WNS series gas/oil-fired steam boilers have outstanding eco-friendly performance. The flue gas emission of WNS series gas/oil-fired steam boilers can meet the environmental protection standards. Facing the strict low NOx emission requirements across the country, ZOZEN Boiler realizes the low emission of NOx (less than 30mg/Nm3) via the advanced low-nitrogen burner and combustion technology. ZOZEN WNS 20 tph steam boilers are applied in the food, chemical and nonferrous metal industries.
ZOZEN energy-efficient WNS series gas/oil-fired steam boilers have two-pass and three-pass structures. This series of boilers adopt the large-diameter corrugated furnace and threaded smoke tubes with high heat transfer efficiency. With the economizer at the end of the flue gas duct, they can enlarge the boiler's heating surface, lower the exhaust gas temperature to 60℃ and improve the boiler's thermal efficiency to over 98%. ZOZEN WNS 8 tph steam boilers are applied in the food, chemical and heating industries.
