ZOZEN WNS series gas-fired and oil-fired boiler is equipped with the advanced condenser, which is a kind of flue gas waste heat exchanger whose working principle is the same as the economizer at the end of the coal-fired boiler. After a condenser is installed at the end of the boiler's flue gas duct, the high-temperature flue gas passes through the flue gas duct and the condenser at the same time, which can heat the water in the condenser, increase the feed water temperature and lower the exhaust gas temperature to achieve the goals of saving fuel and improving the thermal efficiency.
ZOZEN WNS series gas-fired hot water boiler adopts packaged structure, which is convenient and quick for installation to save a lot of basic construction costs for the enterprise. Its internal structure adopts large-diameter waveform strove furnace which can effectively absorb heat expansion to add the radiation heating surface and ensue the low emission of NOx with the advanced low-nitrogen burner to improve the fuel utilization. What's more, its thread smoke tubes have scientific pitch and depth to further strengthen the convective heat transfer and make boiler's thermal efficiency reach 95% and above.
The kick-off meeting of the Lean Factory-Standardization Project of ZOZEN was successfully held at 9 a.m. on April 20, which marked the beginning of ZOZEN's comprehensive reform. From the moment on, ZOZEN would deeply implement the concept of Operation standardization and Process standardization and comprehensively improve the internal management level and overall competitiveness. General Manager Mr. Zhang Guoping, mid and senior-level managers attended the meeting.
SZS series boiler is designed with longitudinal double drums and " D " type chamber structure. Furnace is placed on the right and convection tube bank is on the left, super heater is arranged at convection tube bank. The body is fixed on the basement by middle and both end flexible supports and make the boiler expand horizontally sideways. Around the furnace is membrane water cooling tube wall. Furnace and tube bank are totally separated by the membrane water tube cooling wall at the left side of the furnace. The back part of bundle is sparse shift structure, front part is aligned structure. Smoke from furnace outlet enters re-burning chamber, convection tube bank area and then from left front part enters spiral fine coil economizer and condenser, and finally is discharged to atmosphere through chimney.
