With the vigorous promotion of "coal to gas" policy, gas-fired steam boilers have been widely favored by the market. It is difficult for users to choose when facing many brands of 2-ton gas-fired steam boilers in the market. In this paper, ZOZEN Boiler will show you how to choose the brand of 2-ton gas-steam boiler from two aspects: boiler characteristics and enterprise strength.
It is the core competitiveness of the product brand. As a professional brand of 2-ton gas-steam boiler, ZOZE...
The fuel cost of 10 tph electric boiler: 7,100 kilowatt-hour is multiplied by the local industrial electricity unit price which is nearly 1 RMB, so we can get 1 RMB/kWh and the fuel cost is about 7,100 RMB per hour.
Ash accumulation on the heating surface.
The scaling and ash deposition on the water-cooled wall of the furnace and the ash deposition of the superheater, convention tube bundles, economizer and preheater can increase the thermal resistance of the flue gas, weaken the heat transfer, lessen the cooling effect of the flue gas and increase the exhaust gas temperature of the gas-fired boiler.
Too high excess air coefficient.
Under normal circumstances, as the furnace outlet excess...
A condensing boiler can condense the water vapour in the flue gases and withstand the corrosive and acidic qualities of the flue gas condensate. Although most boilers can condense the flue gasses, only boilers that have heat exchangers constructed from materials able to withstand the corrosion should be used in condensing application. Condensing boilers with primary and secondary heat exchanger do not work well as they are not able to fully condense and defeat the purpose of using a condensing boiler. Also, boilers with this arrangement are prone to condensation in the primary heat exchanger at lower firing rate which can cause damage to the heat exchanger.
Oil Fired Boilers generally require Day Oil Tank to store oil and this oil is transported to a burner through oil piping and oil pump. On the other hand, High-Efficiency Gas Fired Boilers are exactly same as Oil Fired Boilers in construction and the only difference is the transportation of gas to burner requires gas train which comprises of the gas regulator that regulates pressure, the gas strainer to remover dirt from gas while no such valves are required in oil fired boilers.
The efficiency of a coal-fired boiler depends on the loss of the boiler, the best efficiency in the boiler can be achieved if the losses are kept to the minimum. Since 50% of the losses are dependent on the fuel and ambient condition, the best efficiency can be achieved by properly tuning the other 50%, i.e. mainly carbon loss and dry gas loss.
The answer is yes. The bagasse boiler is a distinctive biomass boiler. According to its specific application, it can also be said to be a bagasse biomass power generation boiler. The bagasse boiler is mainly used for power generation, especially large-scale bagasse biomass boiler equipment, such as 75 tons/hour bagasse power generation boiler, 150 tons bagasse boiler, and 180 tons power generation boiler.
As we all know, the stable operation of the natural gas boiler can significantly optimize the operation of the boiler, improve the efficiency of the boiler, and effectively reduce the operating cost of the boiler after effective maintenance. So, what factors will affect the stable operation of natural gas boilers?
