The packaged structure is another characteristic of ZOZEN boiler. After the gas/oil-fired thermal oil heater is delivered to the project site, it can be put into use only by connecting the gas/oil, electricity, which can save a lot of installation costs. What's more, the boiler has the patented equipment to completely remove the moisture from the thermal oil heater after the hydraulic pressure test and reduce the oil dewatering time. Take the 6 million kcal as an example, it usually takes 10 days for oil dewatering while ZOZEN only needs 2 days, which reduces the 80% time for dewatering and directly save the costs for about 30,000 RMB.
This is ZOZEN thermal oil heater adopts the multi-circuit coil design with sufficient heating surface and good heat transfer effect which effectively protect the burner and furnace wall. The boiler adopts high-quality refractory and thermal insulation materials which can well reduce the heat loss based on the different refractory and thermal insulation structure for areas with different temperatures. In addition, based on the actual conditions, we also add the waste heat boiler, economizer, air pre-heater and other energy-saving equipment to make exhaust gas temperature to less than 90℃ and the thermal efficiency to reach over 95% and to help the enterprise reduce consumption and the costs.
The new generation of SZL series boiler is cooperated with Shanghai Jiaotong University. It increases the furnace height, increases rotating speed, adds ash blowing device and designs ash removal system at the bottom of the grate. These well solve problems like scaling, abrasion, front arch, etc. It can also reduce the maintenance and operating costs and extend the service life of the biomass-fired boilers.
Binzhou Xinkeode Technology Co., Ltd. is a private enterprise engaged in the production and sales of neopentyl glycol, sodium formate and formaldehyde. According to the actual situation of Xinkeode’s production lines, ZOZEN Boiler recommended the SZS series gas-fired condensing boiler. This series of steam boiler adopts the large furnace design and advanced burner, which can ensure the sufficient combustion of fuel to improve the fuel use ratio. With the energy-saving equipment at the end of the gas duct, the boiler thermal efficiency can reach 98% and above to save the operating costs.
ZOZEN SZL series biomass-fired boiler has the characteristics of sufficient output and high thermal efficiency. To ensure the sufficient combustion of fuel and save the fuel costs, ZOZEN analyzes the characteristics of different fuels, and optimizes the feeding hopper, width and length of grate, grate rotating speed, secondary air inlet place and direction. ZOZEN also adopts the design of separate air chambers and air dampers to ensure the complete combustion of different biomass fuels and improve the boiler thermal efficiency to above 88%.
ZOZEN SZL series biomass-fired boiler can be fired by various kinds of fuel including biomass particles, wood chips, palm shells, straws and so on. The boiler body is composed of the chain grate and boiler proper with a packaged or pre-assembled structure. It is convenient for installation, so it can reduce the basic construction costs for customers. At the same time, in order to meet the boiler emission standards in different areas, ZOZEN Boiler can design the cyclone, wet scrubber and bag-type dust removal devices to lower the NOx emission to 200mg/m3.
ZOZEN 10 tph SZL series steam boiler is widely applied in the nonferrous metals, pharmaceutical, printing and dyeing and other industries. The SZL series coal-fired/biomass-fired steam boiler is packaged or shop-assembled boiler with double drums and a chain grate stoker structure. The 4-6 tph boiler is a packaged structure and the 6-35 tph boiler is a shop-assembled structure. It is composed of 2 parts. The upper part is heat absorbing surface and the lower part is combustion equipment.
DZL series hot water boiler is horizontal three-pass water-fire tube chain grate boiler. It uses fuel like coal and biomass pellets. The thread smoke tubes inside the drum form the convention heating surface while the drum and two-side water-cooled wall form the furnace radiation heating surface. Its boiler structure is compact. It can be packaged before shipment which can reduce the costs of basic boiler construction. Therefore, it is a kind of popular heating equipment among hotels, schools and hospitals.
