A boiler hydrostatic test is a way in which pressure vessels such as pipelines, plumbing, gas cylinders, boilers and fuel tanks can be tested for strength and leaks. The main purpose of the hydrostatic test is to identify the tightness and compressive strength of the pressure components of the boiler, including but not limited to welding lines, flange joints and tube expansion joints, and visually observe the deformation of the pressure components. Practice has proved that the boiler hydrostatic test can detect defects in boilers, and the corresponding measures can be taken accordingly. Therefore, it is an important step and means to ensure the safe operation of the boiler.
SZS series boiler is designed with longitudinal double drums and " D " type chamber structure. Furnace is placed on the right and convection tube bank is on the left, super heater is arranged at convection tube bank. The body is fixed on the basement by middle and both end flexible supports and make the boiler expand horizontally sideways. Around the furnace is membrane water cooling tube wall. Furnace and tube bank are totally separated by the membrane water tube cooling wall at the left side of the furnace. The back part of bundle is sparse shift structure, front part is aligned structure. Smoke from furnace outlet enters re-burning chamber, convection tube bank area and then from left front part enters spiral fine coil economizer and condenser, and finally is discharged to atmosphere through chimney.