This is our ZOZEN brand new WNS steam boiler. It has three basic security precautions. The first, it's a water level gauge. The second, it's a pressure gauge. The third, it's a safety valve. In addition to the three basic security precautions, our ZOZEN uniquely design an extremely low water level protection. These security precautions greatly ensure the safe operation of the boiler.
ZOZEN 15 tph SZS series steam boiler is widely applied in the printing and dyeing, nonferrous metals, chemical and other industries. The SZS series boiler is designed with longitudinal double drums and "D " type chamber structure. Furnace is placed on the right and convection tube bank is on the left, super heater is arranged at convection tube bank. Smoke from furnace outlet enters re-burning chamber, convection tube bank area and then from left front part enters spiral fine coil economizer and condenser, and finally is discharged to atmosphere through chimney.
ZOZEN 10 tph SZL series steam boiler is widely applied in the nonferrous metals, pharmaceutical, printing and dyeing and other industries. The SZL series coal-fired/biomass-fired steam boiler is packaged or shop-assembled boiler with double drums and a chain grate stoker structure. The 4-6 tph boiler is a packaged structure and the 6-35 tph boiler is a shop-assembled structure. It is composed of 2 parts. The upper part is heat absorbing surface and the lower part is combustion equipment.
This series of double-drum steam boilers adopts a full membrane wall structure with good sealing performance. It is designed with large furnace to ensure full combustion of fuel and the thermal efficiency is over 98%. Meanwhile, this series of gas-fired steam boilers has reliable water circulation. Besides, the arrangement of various safety devices such as explosion-proof doors and flame detectors make the boiler operation safer and more reliable.
SZL series vertical dual drums chain grate water tube steam and hot water boiler, adopts quick fitting and assembly structure. The 4-6t/h boiler is of quick fitting tube structure, exit shop after completely assembled, the boiler of 6-35t/h is composed of 2 main components. The upper assembled component is the boiler proper heat absorbing part, and the lower assembled component is of combustion equipment. The former part of the boiler proper is arranged a membrane wall, the upper part of it is connected to boiler cylinder, and its lower part is connected to collective chest, so as to form a combustion room and absorb the radiated heat from the furnace. Its rear part is arranged with dense convection tubes between upper and lower boiler cylinders. The high temperature smog after combustion shall stand for twice returning flushing transversely to the heat accepting surfaces, and shall be introduced to coal saver singly arranged, and flow into duster and exhausted from chimney in the end.
Steam boilers play a key role in the production process of dye intermediates, proving steam for synthesis, drying and other processes. SZS gas-fired water tube boiler adopts the structure of membrane water wall for better sealing effect and higher thermal efficiency; In addition, to effectively reduce the NOx emission, the boiler is equipped with a large volume furnace and an advanced NOx burner imported from Europe, so the NOx emission can reduce to 30mg/Nm3.
