An air preheater is used to preheat the fuel which further increases the boiler efficiency. It is designed to heat air before another process by extracting the waste heat from the flue gases leaving the boiler to effectively reduce the flue gas temperature and improve the thermal efficiency.
Wood processing is molding the wood under the action of a mould after being softened, bending the curve shape that the design requires, the following procedure is drying and shaping. In this case, wood cannot be heated and shaped by fire, therefore, heating and softening the wood by steam has been the only choice.
The new generation biomass-fired boiler, which is designed and developed by ZOZEN, has optimized the design of the feeding hopper, the length and width of the fire grate, rotary speed of gearbox, 1st and 2nd air ratio, vapor orientation and position, etc; these methods not only take the lead in solving the above problems, but also ensure the full combustion and the thermal efficiency can reach up to 88%; in addition, ZOZEN biomass-fired boiler adopts appropriate heat resisting grate bars, which effectively improve the reliability of the boiler and ensure the stable running of the boiler for a long time.
The production processes of textiles such as drying, shaping, printing, etc require stable heat source support. WNS series gas-fired steam boilers feature fully automatic and safe operation to ensure the stability of the heat source during the production process. At the same time, the gas-fired boiler has remarkable energy-saving and environmental protection effects, the thermal efficiency can reach over 98%, and the NOx emission can be as low as 30 mg/m³, which fully meets the needs of the environmental protection era.