The coal-fired chain grate boiler will be applied to users in Pakistan's oil industry. ZOZEN chain grate boiler has a wide application range of fuel, which can use biomass particles, straw, forest waste, bituminous coal, lean coal, etc., and its performance is stable.
According to the specific conditions of the pulp and paper industry, ZOZEN boiler provides boilers with high combustion efficiency and low operating cost and is recognized by paper enterprises. The advanced boiler automatic controller, man-machine interface, users only need to set easily, the boiler can start and stop, regulate load and according to user requirements, load regulation, automatic water supply and other fully automatic operation.
ZOZEN DZL series boiler can use both biomass and coal as fuel. The dual fuel adaptability would help users to save fuel costs. It adopts three-pass water and fire tube design and can be equipped with economizer and duster cleaner to ensure the combustion efficiency, which can effectively lower the NOx emission. Please kindly click the chat online to get more information.
Among many boiler types, biomass-fired chain grate boiler has the advantages of wide fuel adaptability, low original emission concentration, low operating costs and easy operation. Based on the eco-friendly development thinking, ZOZEN Boiler has long been designing and manufacturing the chain grate boilers. At present, the DZL series industrial boiler adopts the advanced arch design, independently developed membrane water-cooled wall structure, special slag removal technology and reasonable sealing grate structure, which shows an obvious performance advantage.
The packaged structure is another characteristic of ZOZEN boiler. After the gas/oil-fired thermal oil heater is delivered to the project site, it can be put into use only by connecting the gas/oil, electricity, which can save a lot of installation costs. What's more, the boiler has the patented equipment to completely remove the moisture from the thermal oil heater after the hydraulic pressure test and reduce the oil dewatering time. Take the 6 million kcal as an example, it usually takes 10 days for oil dewatering while ZOZEN only needs 2 days, which reduces the 80% time for dewatering and directly save the costs for about 30,000 RMB.
This is ZOZEN thermal oil heater adopts the multi-circuit coil design with sufficient heating surface and good heat transfer effect which effectively protect the burner and furnace wall. The boiler adopts high-quality refractory and thermal insulation materials which can well reduce the heat loss based on the different refractory and thermal insulation structure for areas with different temperatures. In addition, based on the actual conditions, we also add the waste heat boiler, economizer, air pre-heater and other energy-saving equipment to make exhaust gas temperature to less than 90℃ and the thermal efficiency to reach over 95% and to help the enterprise reduce consumption and the costs.
ZOZEN SZL series biomass-fired boiler has the characteristics of sufficient output and high thermal efficiency. To ensure the sufficient combustion of fuel and save the fuel costs, ZOZEN analyzes the characteristics of different fuels, and optimizes the feeding hopper, width and length of grate, grate rotating speed, secondary air inlet place and direction. ZOZEN also adopts the design of separate air chambers and air dampers to ensure the complete combustion of different biomass fuels and improve the boiler thermal efficiency to above 88%.
WNS series gas-fired or oil-fired hot water boiler is smoke-fire tube chamber combustion boiler and adopts two-pass or three-pass structure. It also adopts large-diameter waveform stove furnace with good thermal expansion and safety performance. There are condenser and economizer added at the end of flue gas duct which can improve the thermal efficiency to more than 95% and save boiler's operation costs.
