ZOZEN boiler covers an area of 150 thousand square meters, with an annual production capacity of 2000 industrial boilers and 25000 tons of steam. ZOZEN has built six fully automatic lines for the production of convection pipe, coil pipe, threaded pipe, membrane wall, serpentine tube and header.
ZOZEN WNS series gas/oil-fired steam boilers have outstanding eco-friendly performance. The flue gas emission of WNS series gas/oil-fired steam boilers can meet the environmental protection standards. Facing the strict low NOx emission requirements across the country, ZOZEN Boiler realizes the low emission of NOx (less than 30mg/Nm3) via the advanced low-nitrogen burner and combustion technology. ZOZEN WNS 20 tph steam boilers are applied in the food, chemical and nonferrous metal industries.
ZOZEN energy-efficient WNS series gas/oil-fired steam boilers have two-pass and three-pass structures. This series of boilers adopt the large-diameter corrugated furnace and threaded smoke tubes with high heat transfer efficiency. With the economizer at the end of the flue gas duct, they can enlarge the boiler's heating surface, lower the exhaust gas temperature to 60℃ and improve the boiler's thermal efficiency to over 98%. ZOZEN WNS 8 tph steam boilers are applied in the food, chemical and heating industries.
ZOZEN 10 tph SZL series steam boiler is widely applied in the nonferrous metals, pharmaceutical, printing and dyeing and other industries. The SZL series coal-fired/biomass-fired steam boiler is packaged or shop-assembled boiler with double drums and a chain grate stoker structure. The 4-6 tph boiler is a packaged structure and the 6-35 tph boiler is a shop-assembled structure. It is composed of 2 parts. The upper part is heat absorbing surface and the lower part is combustion equipment.
Bolivia is the highest average altitude country in the world, local Bolivian companies have higher requirements for boilers than general boilers. As the altitude increases, the atmospheric pressure and the air density decrease accordingly, which adversely affects boiler combustion.
In view of this situation, ZOZEN technical team makes adjustments from the combustion system and exhaust system of boiler, fully considering the influence of low air pressure on boiler body design and combustion. By appropriately increasing the volume of the furnace to extend the residence time of the fuel in the furnace, and the problems of slow fuel burning speed and long burning time are solved.
SZL series vertical dual drums chain grate water tube steam and hot water boiler, adopts quick fitting and assembly structure. The 4-6t/h boiler is of quick fitting tube structure, exit shop after completely assembled, the boiler of 6-35t/h is composed of 2 main components. The upper assembled component is the boiler proper heat absorbing part, and the lower assembled component is of combustion equipment. The former part of the boiler proper is arranged a membrane wall, the upper part of it is connected to boiler cylinder, and its lower part is connected to collective chest, so as to form a combustion room and absorb the radiated heat from the furnace. Its rear part is arranged with dense convection tubes between upper and lower boiler cylinders. The high temperature smog after combustion shall stand for twice returning flushing transversely to the heat accepting surfaces, and shall be introduced to coal saver singly arranged, and flow into duster and exhausted from chimney in the end.
