The primary use of steam boiler in tire manufacturing is the vulcanizing process — the curing of the rubber needs steam to provide heat energy. Curing is a process in which chemical or physical action takes place for harder, tougher and more stable linkage.
As we know tires are the most important part of our vehicle because in all the parts of vehicle tires only remain in contact with the earth hence tires carry all the load of vehicle and passengers.
Vulcanization is a p...
Biogas is the mixture of gases produced by the breakdown of organic matter in the absence of oxygen (anaerobically), primarily consisting of methane and carbon dioxide. Biogas can be produced from raw materials such as agricultural waste, manure, municipal waste, plant material, sewage, green waste or food waste. Biogas is a renewable energy source.
Biogas is a byproduct of the decomposition of organic matter by anaerobic bacteria. Biogas is typically composed of 60% methane and 40% CO2...
According to the Wikipedia, Second-generation biofuels, also known as advanced biofuels, are fuels that can be manufactured from various types of non-food biomass. Biomass here means plant materials and animal waste used especially as a source of fuel.
Advanced biofuels are renewable fuels derived from renewable biomass that achieve a fifty percent greenhouse gas emissions reduction over conventional biofuels. The definition of advanced biofuels includes cellulosic biofuels, biomass-bas...
Steam boilers use a contained heat system to generate steam. The steam travels through pipes in the building’s walls where they emerge at radiators in heating systems. The radiators warm from the steam’s heat. As the steam gives off its heat, it condenses back to liquid water and returns to the tank. A boiler system of this type that does not allow outside water sources is a closed system and is highly efficient for using all the condensed water. An open network may be required in operations where the steam or water gets contaminated in such a way that it cannot return to the boiler for reuse.
A condensing boiler can condense the water vapour in the flue gases and withstand the corrosive and acidic qualities of the flue gas condensate. Although most boilers can condense the flue gasses, only boilers that have heat exchangers constructed from materials able to withstand the corrosion should be used in condensing application. Condensing boilers with primary and secondary heat exchanger do not work well as they are not able to fully condense and defeat the purpose of using a condensing boiler. Also, boilers with this arrangement are prone to condensation in the primary heat exchanger at lower firing rate which can cause damage to the heat exchanger.
Oil Fired Boilers generally require Day Oil Tank to store oil and this oil is transported to a burner through oil piping and oil pump. On the other hand, High-Efficiency Gas Fired Boilers are exactly same as Oil Fired Boilers in construction and the only difference is the transportation of gas to burner requires gas train which comprises of the gas regulator that regulates pressure, the gas strainer to remover dirt from gas while no such valves are required in oil fired boilers.
Textile is one of the industries that cannot be separated from steam boilers. Whether it is dyeing or drying, boilers can speed up production smoothly. The oil-fired steam boiler is very suitable for textile mills. The oil-fired steam boilers produced by ZOZEN for textile mills mainly include SZS oil-fired steam boilers and WNS oil-fired steam boilers.
At present, the research and development technology of gas boilers is very mature. The boiler has obvious advantages of stable operation and less pollutant discharge and energy saving. However, if the boiler is not used for a long time, it is necessary to maintain the boiler to maintain the normal operation at the subsequent startup.
