zozen boiler
HomeBoiler tagsthermal oil heating system design

“thermal oil heating system design”- related

  • ZOZEN WNS series gas-fired (oil-fired) boiler production workshop 2019-12-09
    The boiler body of WNS series boilers adopts wet-back structure. The combustion, water level, temperature and steam pressure of the boiler are automatically adjusted and protected, which can realize fully automatical operation to ensure safety and reliability. The large-diameter corrugated furnace of this boiler ensures sufficient combustion of natural gas. Combined with an advanced low NOx burner, it can easily achieve the requirement of NOx≤30mg/Nm3. In addition, the boiler is also equipped with energy-saving equipment at the end of the boiler flue, so that the boiler thermal efficiency can reach over 98%.
  • 35 tph SHL series chain grate steam boiler for oil refining industry 2019-08-30
    In recent years, Jinxi Petrochemical has accelerated its pace of development and is in urgent need of introducing a high-efficient and energy-saving boiler system. Regarding the actual production needs of Jinxi Petrochemical, ZOZEN recommended the safe and efficient SHL series field assembled water tube steam boiler and tailored the boiler system technical solution. This series of boilers has wide coal adaptability, the boiler water circulation adopts all-natural circulation, and each heating surface has relatively independent down comers to supply water, ensuring the safety of the overall water circulation. The large furnace design can extend the residence time of the flue gas in the furnace to make the full combustion of the fly ash and combustible gas. In addition, the flag pattern heating surface absorbs the temperature of the flue gas to a large extent, which improves the thermal efficiency of the boiler.
  • 30 tph SZS gas-fired water tube boiler for chemical industry 2019-07-04
    Steam boilers play a key role in the production process of dye intermediates, proving steam for synthesis, drying and other processes. SZS gas-fired water tube boiler adopts the structure of membrane water wall for better sealing effect and higher thermal efficiency; In addition, to effectively reduce the NOx emission, the boiler is equipped with a large volume furnace and an advanced NOx burner imported from Europe, so the NOx emission can reduce to 30mg/Nm3.
  • 12.5MW YQL gas-fired thermal oil heater for chemical industry 2019-07-04
    Thermal oil heater is a kind of new heat energy equipment with low pressure and high temperature, playing an important role in various industries. The thermal oil heater has wide adaptability of fuels, is suit for natural gas, coal gas, marsh gas, diesel, light oil, etc. The heat exchange surface adopts three-pass round coil tube structure, which features more sufficient heating surface. It is also equipped with an advanced burner to ensure the NOx emission below 30mg/m3. The waste heat boiler, air pre-heater and economizer are installed on the tails of the thermal oil heaters to effectively improve thermal efficiency, which can reach above 98%.
  • 29MW SZS series gas-fired hot water boiler project for central heating 2019-07-04
    People cannot live a comfortable life without heating boilers in the winter, the normal and stable heat source is of great importance to human life. What is following is the increasingly serious problem of environmental pollution, implementing the policy of “coal to gas” is no time to delay, using gas-fired hot water boilers has been the general trend. This series of boilers adopts the design of " D " type membrane wall structure, the steam drum, the water drum and convection tube bundle form the convection heating surface to ensure the the boiler expands on both ends as a whole; at the same time, the combustion chamber is designed with the narrow distance tube membrane water cooling wall to reduce heat lost, in addition, the boiler is equipped with a big combustion chamber for the full combustion of fuel, effectively increasing the boiler thermal efficiency over 98% and reducing the NOx to 30mg/m³, which are superior to the national level one energy efficiency standard.
  • 6 tph biomass-fired water tube boiler project for wood products industry 2019-07-04
    Wood processing is molding the wood under the action of a mould after being softened, bending the curve shape that the design requires, the following procedure is drying and shaping. In this case, wood cannot be heated and shaped by fire, therefore, heating and softening the wood by steam has been the only choice. The new generation biomass-fired boiler, which is designed and developed by ZOZEN, has optimized the design of the feeding hopper, the length and width of the fire grate, rotary speed of gearbox, 1st and 2nd air ratio, vapor orientation and position, etc; these methods not only take the lead in solving the above problems, but also ensure the full combustion and the thermal efficiency can reach up to 88%; in addition, ZOZEN biomass-fired boiler adopts appropriate heat resisting grate bars, which effectively improve the reliability of the boiler and ensure the stable running of the boiler for a long time.
  • 4 tph WNS series gas-fired steam boiler project for textile industry 2019-07-04
    The production processes of textiles such as drying, shaping, printing, etc require stable heat source support. WNS series gas-fired steam boilers feature fully automatic and safe operation to ensure the stability of the heat source during the production process. At the same time, the gas-fired boiler has remarkable energy-saving and environmental protection effects, the thermal efficiency can reach over 98%, and the NOx emission can be as low as 30 mg/m³, which fully meets the needs of the environmental protection era.
1 2 3