ZOZEN gas-fired steam boiler has a wide range of capacity from 1t/h to 130t/h, which can meet the heat demand of most users. According to different capacities, the delivery method of ZOZEN gas-steam boiler is divided into three modes: whole package, assembly and in bulk. ZOZEN Boiler can provide you with a suitable gas-fired steam boiler solution according to the actual working conditions.
35-ton gas-fired boiler, ZOZEN Boiler recommends SZS series gas-fired boiler. SZS series 35 tons gas-fired boiler adopts membrane wall with narrow spacing in its combustion chamber, which not only increases the heating surface of the main body, but also improves the air tightness and reduces the heat loss. The thermal efficiency of the boiler is over 98%.
ZOZEN SZS series oil-fired/gas-fired boiler proper adopts the D-type structure. One side is the furnace, and the other side is the convection heating surface. The partition walls around the furnace body, the partition wall between furnace and convection section, and the front and rear walls all adopt the membrane wall structure. There are foreign advanced burner, economizer and condenser installed at the end of flue gas duct, which can lower the exhaust gas temperature to 60℃, achieve the thermal efficiency of over 98% and control the emission of NOx to less than 30mg/Nm3. This kind of boiler has the characteristics of energy saving and environmental protection, safety and efficiency, simple operation and maintenance, and fully automatic control system which can realize unattended operation.
Binzhou Xinkeode Technology Co., Ltd. is a private enterprise engaged in the production and sales of neopentyl glycol, sodium formate and formaldehyde. According to the actual situation of Xinkeode’s production lines, ZOZEN Boiler recommended the SZS series gas-fired condensing boiler. This series of steam boiler adopts the large furnace design and advanced burner, which can ensure the sufficient combustion of fuel to improve the fuel use ratio. With the energy-saving equipment at the end of the gas duct, the boiler thermal efficiency can reach 98% and above to save the operating costs.
ZOZEN SZS series steam boiler is a kind of D-type chamber structure boiler with longitudinal double drums. It has a big combustion chamber equipped with the low emission burner to effectively reduce the NOx. It also adopts the full membrane tube wall structure and pressurized combustion without smoke mixture.
ZOZEN 35 tph SZS series steam boiler is widely applied in the food, heating and other industries. The SZS series boiler is designed with longitudinal double drums and " D " type chamber structure. Furnace is placed on the right and convection tube bank is on the left, super heater is arranged at convection tube bank. Smoke from furnace outlet enters re-burning chamber, convection tube bank area and then from left front part enters spiral fine coil economizer and condenser, and finally is discharged to atmosphere through chimney.
ZOZEN 15 tph SZS series steam boiler is widely applied in the printing and dyeing, nonferrous metals, chemical and other industries. The SZS series boiler is designed with longitudinal double drums and "D " type chamber structure. Furnace is placed on the right and convection tube bank is on the left, super heater is arranged at convection tube bank. Smoke from furnace outlet enters re-burning chamber, convection tube bank area and then from left front part enters spiral fine coil economizer and condenser, and finally is discharged to atmosphere through chimney.
ZOZEN longitudinal seam welding adopts advanced submerged arc automatic welding technology to ensure welding quality. After the pre-welding treatment, ZOZEN uses automatic argon arc welding technology to complete the butt welding of steel pipes, and performs X-ray real-time imaging of the welds to prevent unqualified welds from entering the next production process. The advanced automatic welding machine completes the automatic welding of the longitudinal seams under the tracking of the photoelectric system, which not only improves the efficiency but also effectively guarantees the welding quality.
