zozen boiler
HomeBoiler tagswater tube type boiler

“water tube type boiler”- related faq

  • What is a condensing boiler? 2021-04-23
    A condensing boiler can condense the water vapour in the flue gases and withstand the corrosive and acidic qualities of the flue gas condensate. Although most boilers can condense the flue gasses, only boilers that have heat exchangers constructed from materials able to withstand the corrosion should be used in condensing application. Condensing boilers with primary and secondary heat exchanger do not work well as they are not able to fully condense and defeat the purpose of using a condensing boiler. Also, boilers with this arrangement are prone to condensation in the primary heat exchanger at lower firing rate which can cause damage to the heat exchanger.
  • What are the methods of detecting water level in steam boilers? 2021-04-15
    On a steam raising boiler there are three clear applications for level monitoring devices: 1) Level control - To ensure that the right amount of water is added to the boiler at the right time.
  • How do boilers work in an industry? 2021-03-26
    A steam boiler is a water containing vessel which transfers heat generated by a fuel source into steam, which is then piped and directed to points where it could be used while running industrial equipment. The basic idea here is to convert water to steam using a source of heat.
  • How do industrial boiler work? 2021-03-19
    Whether it's an industrial hot water boiler or an industrial steam boiler, they all depend on fuel to run. The process of heating is initiated as the burner heats or eventually evaporates the water inside of it. It's actually transported via intricate pipe systems. Steam boilers transport through the pressure created by the process, while hot water boilers use pumps to move heat throughout the system. Eventually the condensed steam or cooled water returns back through the pipes to the boiler system, so the heating process can be initiated again. As the boiler creates heat energy, a byproduct of the process — flue gases — are exited through a chimney system. Because of this, regulating the industrial boiler emissions is a very serious issue.
  • What are the advantages of shell boilers? 2021-03-12
    1) The entire plant may be purchased as a complete package, only needing securing to basic foundations, and connecting to water, electricity, fuel and steam systems before commissioning. This means that installation costs are minimised. 2) This package arrangement also means that it is simple to relocate a packaged shell boiler. 3) A shell boiler contains a substantial amount of water at saturation temperature, and hence has a substantial amount of stored energy which can be called upon to cope with short term, rapidly applied loads. *This can also be a disadvantage in that when the energy in the stored water is used, it may take some time before the reserve is built up again. 4)The construction of a shell boiler is generally straight forward, which means that maintenance is simple. 5)Shell boilers often have one furnace tube and burner. This means that control systems are fairly simple. Although shell boilers may be designed and built to operate up to 27 bar, the majority operat
  • What are the external water treatment processes? 2021-01-15
    It is generally agreed that where possible on steam boilers, the principal feedwater treatment should be external to the boiler.
  • What is the working principle of dust removal of coal-fired boilers? 2020-12-25
    The flue gas first enters the cyclone dust collector which acts as a primary dust collector to make the large dust particles in the flue gas settle down. The cyclone dust collector is a dust removal device which uses the centrifugal force generated by the cyclone flow to separate the dust particles from the air flow. Afterwards, the flue gas enters the wet scrubber dust collector which is a circular-type cylinder. The circulating water enters the dust collector from the upper overflow tank to form a uniform water film on the inner wall of the dust collector. The flue gas is induced tangentially or spirally from the lower part of the cylinder and rotates in the cylinder. Under the influence of the centrifugal force, the dust particles are separated from the flue gas and then the flue gas is also spirally led out from the top of the cylinder. The dust particles are thrown to the water film, transferred to the bottom and finally discharged from the dust port.
  • How to deal with the water shortage problem of the gas-fired boiler? 2020-12-18
    In the operation of gas-fired steam/hot water boiler, it need continuous water supply to ensure the water volume in the drum. Once water shortage occurs, it will cause the boiler dry burning problem, which will further result in the boiler failure and other problems.
1 2 3 4 5 6