zozen boiler
HomeBoiler tagsYQW series gas-fired horizontal thermal oil heater project

“YQW series gas-fired horizontal thermal oil heater project”- related

  • ZOZEN Popular Boiler Types - WNS Series and SZS Series Gas-fired Steam/Hot Water Boiler 2021-07-29
    WNS series and SZS series gas-fired steam/hot water boilers are the best-selling products of ZOZEN Boiler, which have the advantages of high thermal efficiency over 98%, emission of nitrogen oxides below 30mg/nm, excellent energy saving and environmental protection performance, and are well received by domestic and foreign markets. The capacity range of ZOZEN gas-fired steam/hot water boiler is 1-110 t/h and 0.7-116 MW, which can meet various production and heating needs of enterprises.
  • ZOZEN New Customized WNS Series Gas/Oil Fired Steam Boiler 2021-07-29
    WNS series gas-fired steam boilers customized by ZOZEN Boiler have the advantages of high thermal efficiency, strong environmental protection performance and automatic operation. It is commendable that the WNS series gas-fired boilers adopt the patented appearance of ZOZEN Boiler (patent No. ZL202030031426), which has beautiful appearance and good corrosion resistance.
  • ZOZEN Thermal Oiler Heater Shipped to Finland 2021-04-21
    The Dongwha Finland plant is located in southern Finland. The plant has been owned by Dongwha Enterprises since 2017, mainly produces wide range of different types of impregnated papers. ZOZEN Boiler provided a set of 7 million kcal thermal oil heater to Dongwha Finland under the strict circumstance of COVID-19 pandemic.
  • 3 sets of 29 MW gas-fired hot water boilers serving for Jin-an Thermal Power in Tianjin 2021-02-19
    The 3 sets of 29 MW gas-fired hot water boilers serving for Jin-an Thermal Power in Tianjin were installed in 2015. The boiler is a common type for central heating which adopts the full membrane wall structure and a D-type layout. It has the characteristics of micro-positive pressure combustion, no air leakage, low heat loss caused by exhaust gas and high thermal efficiency. During the boiler manufacturing process, ZOZEN Boiler emphasizes that the welding of each baffle must be tight, and the height of welding leg should meet the requirements specified on the design drawing to ensure the leakproofness of the boiler. In addition, ZOZEN Boiler also sets strict welding standards for detailed parts including the door opening and kiln eye to prevent the high-temperature flue gas from leaking.
  • ZOZEN showed the live hydrostatic test of thermal oil heater to Finnish customers 2021-01-19
    Continuing the 2020 industrial live streaming mode, ZOZEN Boiler has made the online visit normal. Recently, at the modern production base of Wuxi ZOZEN Boiler, technicians had connected with Finnish customers via the live streaming to show the whole process of the boiler hydrostatic test. Through the live streaming, ZOZEN not only showed the entire panorama of the hydrostatic test, but also showed the operating steps and pressure gauge values on the top of the boiler. The customers were very satisfied.
  • ZOZEN Boiler-busy workshop of WNS series boiler 2020-12-15
    ZOZEN WNS series oil-fired/gas-fired boiler is a kind of fire tube wetback boiler with a two-pass or three-pass structure. It is equipped with foreign advanced burner, economizer and condenser installed at the end of flue gas duct to lower the exhaust temperature to 60℃, achieve the thermal efficiency of over 98% and control the emission of NOx to less than 30mg/Nm3. It has the characteristics of compact structure, small covering area, short installation period, easy operation and complete automatic control system which can realize unattended operation.
  • ZOZEN thermal oil heater (packaged structure) 2020-12-07
    The packaged structure is another characteristic of ZOZEN boiler. After the gas/oil-fired thermal oil heater is delivered to the project site, it can be put into use only by connecting the gas/oil, electricity, which can save a lot of installation costs. What's more, the boiler has the patented equipment to completely remove the moisture from the thermal oil heater after the hydraulic pressure test and reduce the oil dewatering time. Take the 6 million kcal as an example, it usually takes 10 days for oil dewatering while ZOZEN only needs 2 days, which reduces the 80% time for dewatering and directly save the costs for about 30,000 RMB.
  • ZOZEN thermal oil heater (high thermal efficiency of over 95%) 2020-12-07
    This is ZOZEN thermal oil heater adopts the multi-circuit coil design with sufficient heating surface and good heat transfer effect which effectively protect the burner and furnace wall. The boiler adopts high-quality refractory and thermal insulation materials which can well reduce the heat loss based on the different refractory and thermal insulation structure for areas with different temperatures. In addition, based on the actual conditions, we also add the waste heat boiler, economizer, air pre-heater and other energy-saving equipment to make exhaust gas temperature to less than 90℃ and the thermal efficiency to reach over 95% and to help the enterprise reduce consumption and the costs.
1 2 3 4