biomass boiler manufacturers canada, ZOZEN boiler care fully researches and develops high-efficienct and energy-saving boilers

The primary purpose of the boiler is to supply energy to the facility's operations – for comfort heating, manufacturing process, laundry, kitchen, etc. The nature of the facility's operation will dictate whether a steam or hot water boiler should be used. Hot water is commonly used in heating applications. Under these conditions, there is a wide range of ZOZEN hot water boiler products available.

biomass boiler manufacturers canada, Jindal Group is a world-renowned manufacturer and supplier of steel pipe products and fittings. With the expansion of its sales network, Jindal is preparing to build a ductile iron pipe production plant in Abu Dhabi, UAE. Boiler, as the thermal energy equipment of the factory, is an indispensable part in the construction of the factory area. The person in charge of Jindal immediately contacted ZOZEN. Considering that the United Arab Emirates is rich in natural gas resources, ZOZEN recommended  its energy-saving and environmentally friendly WNS series gas boilers for Jindal.

The function of CFB boiler secondary air: Ensuring that the combustibles overflowing from the dense phase zone will be further oxygen-enriched in the lean phase zone (suspension section), so that the fuel is fully burned in the furnace and the temperature difference between the upper and lower furnace reduces.

biomass boiler manufacturers canada, With thermal efficiency over 82% and NOx emissions less than 100mg/Nm3, ZOZEN DZL series boilers feature high efficiency and low emissions. They adopt single-drum structure and a chain grate. The heat transfer coefficient of threaded smoke tubes is 1.8 times higher than ordinary tubes. In order to expand the capacity, PT. New Hope Indonesia introduced ZOZEN DZL series coal-fired steam boiler to provide efficient and reliable heat source guarantee for feed production. 

ZOZEN WNS series gas fired boiler not only adopts advanced low NOx burners. And through the flue gas recirculation technology, about 10% -30% of the flue gas at the tail of the boiler is sucked into the air inlet of the burner through the flue gas pipe, mixed with the combustion-supporting air, and then entering the furnace, thereby reducing the temperature and oxygen concentration in the combustion area, and finally reducing The amount of thermal NOx is generated, and the NOx in the tail gas of the boiler are less than 30mg/Nm3, which meets the requirements of low nitrogen emissions of the enterprise.enterprise.

The longitudinal and circumferential seam welding of ZOZEN adopts advanced submerged arc automatic welding technology to ensure the welding quality. All longitudinal and circumferential seams are subjected to 100% radiographic inspection.

This project is of great significance to ZOZEN, promoting ZOZEN’s development in Central Asia and building a strong foundation in future international development, biomass boiler manufacturers canada.