zozen boiler
Home Media News Latest news energy saving gas fired steam boiler for 3 ton capacity, ZOZEN boiler persistently provides employees with a self-growth platform

energy saving gas fired steam boiler for 3 ton capacity, ZOZEN boiler persistently provides employees with a self-growth platform

28 Jan 2021

With emission requirements changing every day, it is also important to make sure that you are proactive when selecting equipment that will comply with future air regulations. Zozen Boiler has the most experience in selecting boiler equipment that will meet current and future NOx requirements.

Under the background of increasingly fierce market competition and rising comprehensive costs, Mengniu Dairy always adheres to the concept of sustainable development. When purchasing boiler equipment, it uses clean energy natural gas as fuel to reduce environmental pollution. So far, Mengniu Dairy has purchased more than ten sets of WNS series gas-fired steam boilers from ZOZEN.

ZOZEN SZS series gas-fired boiler focuses on the details of structure design. The comb-shaped plates are used for welding and sealing between the membrane walls and drums. It also designs the condensate drainage system in the convection area to prevent the acidic condensate water from corroding the furnace body, which can effectively reduce the maintenance work and extend the service life of the boiler.

ZOZEN boilers adopt the ultra-low nitrogen burner with flue gas recirculation method to realize low NOx emission. Adding flue gas to the combustion air to reduce the oxygen content in the combustion air and lower the flame temperature at the combustion center, so as to greatly reduce the generation of NOx. At the same time, superimposed use of world advanced technologies such as staged combustion of ultra-low nitrogen burner and internal flue gas circulation realizes the stable and low emission of NOx, energy saving gas fired steam boiler for 3 ton capacity.

energy saving gas fired steam boiler for 3 ton capacity, The boiler hydrostatic test is a test of strength and tightness with pressurized water after the boiler or components are assembled. The main purpose of the hydrostatic test is to test the tightness and compression strength of boiler pressure-bearing components, tell whether there is leakage of welding seams, flange joints and pipe expansions, and watch the deformation conditions of pressure-bearing components with naked eyes. Practice has proved that the boiler defects can be found through the hydrostatic test, and the safety of boiler operation can be ensured after the corresponding measures are taken in time. Therefore, the hydrostatic test is an important step and means to ensure the safe boiler operation.

ZOZEN’s YLW series coal-fired/biomass-fired thermal oil heater has wide fuel adaptability to various kinds of coal and biomass. The boiler’s heat exchange surface adopts square coil structure with more sufficient heating surface and higher thermal efficiency. With the flue gas waste heat system, the thermal efficiency can reach to 85%. Meanwhile, advanced measurement and control systems of oil temperature, smoke temperature and oil pressure can ensure the long-time and stable operation of the thermal oil heater. ZOZEN has successfully provided the stable heat source for the forming and drying processes in the production of laundry soap, bath soap and other products of Azhar Corporation (Pvt) Ltd..

One applies his knowledge to practice and his knowledge advances together with practice. Through the internal training, ZOZEN’s leaders should grasp the opportunity to change their minds, understand the essence of training and apply what they learned to practice in order to better promote the process of ZOZEN Boiler Lean Factory Standardization Project, enhance ZOZEN’s core competitiveness and help ZOZEN Boiler go further and more steadily in the fierce market competition.

Related news View More
  • Energy Costs and Stable Steam Supply Draw Attention as ZOZEN Boiler Provides Diverse Steam Solutions for Textile Enterprises Worldwide
    From spinning and weaving to dyeing, printing and heat setting, steam is required throughout multiple stages of textile production. As textile enterprises pay closer attention to energy costs, steam supply stability and emission requirements, boiler selection can no longer be based solely on rated evaporation capacity. Local fuel availability, production load, boiler room conditions and ongoing operation and maintenance also need to be considered. Recent textile projects served by ZOZEN Boiler ...
    10 Nov 2026
  • ZOZEN Boiler Supports Building Materials Projects in Hubei with Steam and Thermal Oil Solutions
    IntroductionIn Wuhan, Hubei Province, Hubei Hanjia New Materials Co., Ltd. and Wuhan Yiqingsheng Building Materials Co., Ltd. required thermal energy equipment for autoclave curing and continuous production-line heating, respectively. Based on the production processes, fuel conditions and site requirements of the two companies, ZOZEN Boiler supplied an 8 t/h DZL series biomass steam boiler and a 7.2-million-kcal YWW series biomass thermal oil boiler. The two projects use different heat-transfer ...
    03 Nov 2026
  • ZOZEN Gas-Fired Steam Boiler Marks Five Years of Service at Guizhou Haocaitou, Supporting Food Production
    At Guizhou Haocaitou Food Co., Ltd. in Tongren, Guizhou Province, a ZOZEN WNS series gas-fired steam boiler has been operating for five years as part of the company’s steam supply system. The WNS10-1.25-Q boiler, with a rated capacity of 10 t/h, serves as an important heat source for food production. In recent feedback, the customer noted that matching the equipment configuration to production requirements, along with ease of daily operation and maintenance, were key considerations when se...
    27 Oct 2026

Find the Right Boiler For You

Name *

Email *

WhatsApp/WeChat

Products

Power/Capacity