ZOZEN SZS series steam boiler is a kind of D-type chamber structure boiler with longitudinal double drums. It has a big combustion chamber equipped with the low emission burner to effectively reduce the NOx. It also adopts the full membrane tube wall structure and pressurized combustion without smoke mixture.
ZOZEN 15 tph SZS series steam boiler is widely applied in the printing and dyeing, nonferrous metals, chemical and other industries. The SZS series boiler is designed with longitudinal double drums and "D " type chamber structure. Furnace is placed on the right and convection tube bank is on the left, super heater is arranged at convection tube bank. Smoke from furnace outlet enters re-burning chamber, convection tube bank area and then from left front part enters spiral fine coil economizer and condenser, and finally is discharged to atmosphere through chimney.
The boiler body of WNS series boilers adopts wet-back structure. The combustion, water level, temperature and steam pressure of the boiler are automatically adjusted and protected, which can realize fully automatical operation to ensure safety and reliability. The large-diameter corrugated furnace of this boiler ensures sufficient combustion of natural gas. Combined with an advanced low NOx burner, it can easily achieve the requirement of NOx≤30mg/Nm3. In addition, the boiler is also equipped with energy-saving equipment at the end of the boiler flue, so that the boiler thermal efficiency can reach over 98%.
People cannot live a comfortable life without heating boilers in the winter, the normal and stable heat source is of great importance to human life. What is following is the increasingly serious problem of environmental pollution, implementing the policy of “coal to gas” is no time to delay, using gas-fired hot water boilers has been the general trend.
This series of boilers adopts the design of " D " type membrane wall structure, the steam drum, the water drum and convection tube bundle form the convection heating surface to ensure the the boiler expands on both ends as a whole; at the same time, the combustion chamber is designed with the narrow distance tube membrane water cooling wall to reduce heat lost, in addition, the boiler is equipped with a big combustion chamber for the full combustion of fuel, effectively increasing the boiler thermal efficiency over 98% and reducing the NOx to 30mg/m³, which are superior to the national level one energy efficiency standard.
Wood processing is molding the wood under the action of a mould after being softened, bending the curve shape that the design requires, the following procedure is drying and shaping. In this case, wood cannot be heated and shaped by fire, therefore, heating and softening the wood by steam has been the only choice.
The new generation biomass-fired boiler, which is designed and developed by ZOZEN, has optimized the design of the feeding hopper, the length and width of the fire grate, rotary speed of gearbox, 1st and 2nd air ratio, vapor orientation and position, etc; these methods not only take the lead in solving the above problems, but also ensure the full combustion and the thermal efficiency can reach up to 88%; in addition, ZOZEN biomass-fired boiler adopts appropriate heat resisting grate bars, which effectively improve the reliability of the boiler and ensure the stable running of the boiler for a long time.
