The normal temperature of the combustion chamber in a biomass boiler can vary depending on the type and design of the boiler, as well as the specific fuel being used. Generally, the combustion temperature in a biomass boiler can range from 800 to 1200 degrees Celsius (1472 to 2192 degrees Fahrenheit).
However, it's important to note that the temperature of the combustion chamber should be monitored regularly to ensure safe and efficient operation. If the temperature is too low, it can result in...
Coking methods:
a) Open the ignition door, lay wood blocks of 1-1.5m range long area in front of grate (better use refractory wood blocks like tree knot, wood plate with nails prohibited), and use cotton or other combustible to ignite.
b) Flame should be in the middle of furnace, burning evenly and can not be intermittent. During boiling, fire should be gradually strengthened to avoid sudden heating. During wood coking period, open flue damper to adopt natural ventilation.
After coking more t...
A boiler is a kind of equipment that uses the heat released by fuel combustion to heat the working medium and generate steam at a certain pressure and temperature. It is composed of two parts: boiler and furnace. Meanwhile, in order to ensure the normal operation of the boiler, the necessary accessories, instruments and auxiliary equipment must be provided. Knowledge of boiler system is complex, so users often face many difficulties in purchasing. Here, ZOZEN Boiler will explain to you what is t...
From wood burning to pellet-firing biomass, alternative fuel boilers and solid fuel fired boilers offer environmentally friendly energy options and cost efficiencies. With the push to become less reliant on fossil fuels, alternative fuel boilers provide a way for plant managers to save money on fuel sources as well as meet tightening emission regulation standards.
Normally a boiler is provided with two independent sensors for emergency low water level burner cut-outs. So this would never happen. However, if it does, don't take any chances! Shut off the burners immediately!
Before you start raising the level in the boiler you have to find out if any part of the furnace walls has been overheated. If you raise the level over a glowing steel-wall then the boiler might produce more steam than the safety valves can handle and a nasty explosion would be the result.
