(Question details) specific performance:The gas boiler is powered on, press start, the motor does not turn. Answer: Fault reason:1. Insufficient pneumatic locking.2. The solenoid valve is not sealing, and there is air leakage at the joint. Check the lock.3. The thermal relay is open.4. At least one of the conditional circuits is not valid (water level, pressure, temperature and to check whether the program controller is energized to start). Troubleshooting:1. Adjust the air pressure to the requested value.2. Clean or repair solenoid valve pipe joint.3. Check whether the component is damaged and motor current by reset.4. Check whether the water level, pressure and temperature exceed the limit.ZOZEN gas-fired boiler adopts automatic control to control the operation, combustion, water level, temperature and steam pressure. In case of such problems, the system will automatically prompt the error code.
Volatile matter in fuel, particularly in solid fuels like coal or biomass, plays a crucial role in the combustion process within boilers. Understanding the effect of volatile matter can help optimize the boiler operation for better efficiency and emissions. Here are the impacts of volatile matter on boiler combustion:
Ignition and Combustion Stability: High volatile matter content aids in the easy ignition of the fuel. As volatile components release and ignite rapidly when the fuel is heated, t...
The water level of steam drum can reflect the condition between feedwater quantity and evaporation quantity of boiler. If the two parameters maintain a stable balance, the water level also remains unchanged; otherwise, the water level will rise or fall. Besides, there is also a false water level phenomenon. How do we understand the false water level?
Proper shutdown procedures are crucial for ensuring the safe and efficient operation of a coal-fired steam boiler. The following steps should be followed when shutting down a coal-fired steam boiler:
1. Reduce the load: Before shutting down the boiler, the load should be reduced to its minimum level. This will help to prevent sudden drops in pressure and temperature, which could cause damage to the boiler and its components.
2. Shut off the fuel supply: The fuel supply to the boiler should be ...
A biomass-fired boiler furnace that has multiple issues such as wall cracks, deformation, coking, and tilt, loose bricks, tube wall blockage, burned-out rock wool sealing, and combustion chamber wall damage requires immediate attention to prevent further damage and potential safety hazards.
Firstly, it is recommended to shut down the boiler immediately to prevent any further damage and ensure the safety of the surrounding area. The boiler should not be restarted until all necessary repa...
Industrial steam boilers can produce noise for several reasons, including:
1. Combustion noise: Combustion noise is caused by the sound of the flames as they burn the fuel. This noise is typically louder during startup and shutdown, and can be reduced by optimizing the combustion process.
2. Boiler fan noise: Boiler fans are used to supply combustion air and to exhaust flue gases. The noise generated by the boiler fan can be reduced by installing a silencer or adjusting the fan speed.
3. Wate...
When it comes to coal fired boilers, the rear arch plays a critical role in the combustion process. The main function of the rear arch is to keep the fuel particles in suspension and prevent them from falling into the ash hopper, which can lead to incomplete combustion and decreased efficiency.
At ZOZEN, we understand the importance of a well-designed rear arch for coal fired boilers. That's why our coal fired boilers are equipped with advanced rear arch designs that enhance the combust...
Oil-fired hot water boilers are hot water equipment that is widely used in industrial and civil fields. However, sometimes during use, oil-fired hot water boilers may emit a large amount of white smoke. What is the cause of this?
Firstly, the reason for the oil-fired hot water boiler emitting a large amount of white smoke may be incomplete combustion of the boiler. This may be due to insufficient oil supply, poor oil quality, excessive deposits inside the combustion chamber, and other i...
