Boilers are widely used in various industries and households to provide heat or power. However, the combustion of fuel in the boiler chamber generates not only heat and steam, but also various pollutants, including nitrogen oxides (NOx). NOx is a group of harmful gases that can cause acid rain, smog, and respiratory diseases. Therefore, controlling the emission of NOx from boilers is crucial for both environmental protection and human health.
The formation of NOx in boiler flue gas is a complex...
1. After boiler body, economizer, air pre-heater, dust collector, etc are in place and installed, connect FD fan, ID fan, etc according to drawing and then connect corresponding flue gas duct. After fan in place, alignment between foundation and equipment base should be conducted with parallels. Fan position alignment should center on a shaft, central elevation deviation and vertical and lateral central line positional deviation should be 10mm or less and fan spindle should be in level state. Th...
The flue gas treatment of biomass boiler adopts the pretreatment and deep processing. The deep processing adopts the pulsed jet cloth filter, the waste gas treated by this system can meet the discharge standard stably. The flue gas enters the cyclone dust collector or flame arrestor through the dust removal pipeline.
Generally, small gas-fired hot water boilers are between 0.7 MW and 14 MW, and the output of boilers is different, so the prices are different. Different pressures require different techniques, materials and pressures. The higher the pressure, the higher the price.
The burner of natural gas boiler refers to the burner for gas-fired boiler. Gas burners are divided into natural gas burners, urban gas burners, LPG burners and methane burners. The burner of natural gas boiler is just one kind of burner.
The ignition system of gas-fired boiler adopts high-energy igniter, which belongs to low-voltage capacitive discharge device. Its main structure is composed of nddh high-energy igniter, nddz igniter and nddl shielded ignition cable.
Combustion is a process which needs constant air supply for its survival, but as we move up the earth i.e. at higher altitudes, things aren’t the same as they used to be at sea level. Due to decreased air density at higher altitude, it will consume the same volume of air but will not consume the same mass of air.
This results in less fuel consumption & less steam generation rate. Due to the reduction of mass flow of gases through tubes of a steam boiler, convective heat transf...
According to the Wikipedia, Second-generation biofuels, also known as advanced biofuels, are fuels that can be manufactured from various types of non-food biomass. Biomass here means plant materials and animal waste used especially as a source of fuel.
Advanced biofuels are renewable fuels derived from renewable biomass that achieve a fifty percent greenhouse gas emissions reduction over conventional biofuels. The definition of advanced biofuels includes cellulosic biofuels, biomass-bas...
