zozen boiler
HomeBoiler tagsboiler for factory glass

“boiler for factory glass”- related

  • ZOZEN new type of condenser for WNS series gas-fired and oil-fired boiler 2020-10-26
    ZOZEN WNS series gas-fired and oil-fired boiler is equipped with the advanced condenser, which is a kind of flue gas waste heat exchanger whose working principle is the same as the economizer at the end of the coal-fired boiler. After a condenser is installed at the end of the boiler's flue gas duct, the high-temperature flue gas passes through the flue gas duct and the condenser at the same time, which can heat the water in the condenser, increase the feed water temperature and lower the exhaust gas temperature to achieve the goals of saving fuel and improving the thermal efficiency.
  • ZOZEN thermal oil heaters for Hengfa Energy Saving Technology 2020-04-23
    Recently, ZOZEN delivered the thermal oil heaters for Hengfa Energy Saving Technology. As a leading industrial boiler manufacturer, the thermal oil heaters of ZOZEN have wide adaptability of fuels, are suit for natural gas, coal gas, marsh gas, diesel, light oil, etc. The heat exchange surface adopts three-pass round coil tube structure, which features more sufficient heating surface. The heaters are also equipped with the advanced burners to ensure the NOx emission is below 30mg/m3.
  • Sri Lankan customers were invited to visit ZOZEN production base 2020-01-13
    In recent years, with the continuous development of "the Belt and Road", China's manufacturing industry has gradually occupied the economic market of Sri Lanka. Sri Lanka Kaka's delegation had conducted a conprehensive investigation of industrial boiler manufacturers in China to choose a good supplier. Through the collection and analysis of the boiler market data in China, ZOZEN stood out with prominent quality in industrial boilers. After preliminary communication, the delegation was attracted by ZOZEN's professionalism and decided to conduct a fied inspection.
  • ZOZEN successfully completed each boiler hydrostatic test 2020-01-13
    A boiler hydrostatic test is a way in which pressure vessels such as pipelines, plumbing, gas cylinders, boilers and fuel tanks can be tested for strength and leaks. The main purpose of the hydrostatic test is to identify the tightness and compressive strength of the pressure components of the boiler, including but not limited to welding lines, flange joints and tube expansion joints, and visually observe the deformation of the pressure components. Practice has proved that the boiler hydrostatic test can detect defects in boilers, and the corresponding measures can be taken accordingly. Therefore, it is an important step and means to ensure the safe operation of the boiler.
  • ZOZEN 10.5MW gas-fired low NOx hot water boiler for heating industry 2019-11-14
    Veolia (Harbin) Thermal Power Co., Ltd. was established in 2003 and is a Sino-foreign joint venture controlled by Veolia Group. ZOZEN customized a complete boiler system including multiple sets of WNS series gas-fired hot water boilers. This series of gas-fired boilers adopts full corrugated furnace to increases the strength and elasticity of the furnace and enhances the disturbance of the flue gas, effectively improving the heat transfer effect. The threaded fire tubes can effectively absorb the flame energy, and the heat transfer coefficient is 1.2 times higher than that of the ordinary tube. At the same time, the finned tube condenser added at the end of the flue can increase the boiler thermal efficiency to over 98%
  • ZOZEN YY(Q)W series gas-fired thermal oil heaters 2019-09-03
    ZOZEN YY(Q)W series horizontal thermal oil heaters adopt special processing technology, and have wide fuel adaptability, suitable for natural gas, coal gas, blast furnace gas, heavy oil, light oil, etc. They have the advantages of safety, high efficiency, energy saving and environmental protection, and the thermal efficiency is over 95%.
  • ZOZEN YLW series coal-fired (biomass-fired) thermal oil heaters 2019-09-03
    ZOZEN YLW series horizontal thermal oil heaters have wide fuel adaptability, applicable to a wide range of fuels including bituminous coal, anthracite and biomass particles; they adopt the design of square coil for sufficient heating surface, which is safe and efficient, and the thermal efficiency is leading in the boiler industry.