Thermal fluid degradation or “burn-up” in a thermal fluid heater can be a significant issue that leads to the loss of fluid properties, system inefficiency, and potential equipment damage. Here are the common reasons why thermal heating fluid may degrade or burn up in your thermal fluid heater:
1. Overheating:
Exceeding the thermal fluid’s maximum recommended operating temperature can lead to ‘cracking’ or breaking down of the fluid. This may produce low molecular...
Choosing a thermal fluid (also known as a heat transfer fluid or HTF) for an industrial boiler application is a critical decision, as it directly impacts the safety, efficiency, and performance of your heating system. Here’s a step-by-step guide to help an industrial boiler buyer or manufacturer choose the right thermal fluid:
1. Operating Temperature Range:Determine the required operating temperature range of your application. Choose a thermal fluid that has a bulk temperature operating ...
There are several ways to estimate the thermal efficiency of gas-fired boilers:
1. Direct method: This method involves measuring the amount of fuel consumed and the amount of heat produced by the boiler. By comparing these two values, it is possible to calculate the thermal efficiency of the boiler.
2. Indirect method: The indirect method involves measuring various parameters such as flue gas temperature, ambient air temperature, and fuel consumption, and then calculating the t...
If the electric current of the circulating pump in a thermal oil heater is lower than the normal value, it may indicate a problem with the pump or the system. Here are some potential causes and solutions:
1. Low fluid level: If the thermal oil level is low, the pump may not be able to circulate the oil properly, leading to lower current readings. Check the fluid level and add more oil if necessary.
2. Clogged filter: A clogged filter can restrict the flow of thermal oil, causing the pump to wo...
Regular maintenance is essential to ensure safe and efficient operation of industrial thermal oil heaters. Here are some of the key maintenance tasks that should be performed:
1. Daily checks: The operator should perform daily checks of the heater, including checking the fuel level, the temperature of the thermal oil, and the pressure of the system.
2. Cleaning: The heater should be cleaned regularly to remove any buildup of soot, ash, or other debris that can reduce efficiency or cause damage...
Here, we'll address four of the key mechanical benefits that serpentine coil heaters have to offer.
1. Coil Replacement
Coil replacement in serpentine industrial coil heaters is notably easier than that in helical coil heaters. With serpentine coil thermal oil heaters, you can replace one tube at a time instead of replacing the entire coil. This can save you thousands of dollars on the cost of purchasing a new helical coil in its entirety. Because the coil replacement can be taken care of quickly, you'll also save hundreds of thousands of dollars by avoiding excess facility downtime.
The circulating pressure of a thermal oil boiler is generated by the driving of the circulating oil pump to the thermal oil circulation. Generally, the working pressure of the thermal oil pump is 4 ~ 8kg / cm2. Actually, the pressure of the thermal oil pump differs from different working conditions.
What are the factors that affect the maximum pressure of thermal oil heater?
1. Pressure of circulating hot oil pump
The pressure of liqu...
As an important heat energy supply equipment, industrial boiler is widely used in food, electronics, paper making, building materials, textiles and chemical industries. According to the medium, industrial boilers can be divided into steam boilers, hot water boilers and thermal oil heaters. In order to solve the problem "How many tons are the rated thermal power of 42 MW of industrial boiler?" First of all, we need to know the basic knowledge of rated thermal power and unit ton.
