Through the analysis of the brewing industry, ZOZEN provides the best wine heating boilers solution for the fermentation industry, with better energy saving and emission reduction and better fuel adaptability.
Textile refers to a multi-scale structural processing technique of a fiber or fiber assembly, it includes many steam consuming sections including dyeing, drying, slashing, printing, pressing etc.., all of which needs steam from boilers. With the increase in the demand for textiles, the steam consumption of textile factories is also increasing. Whether building a new textile factory or rebuilding and expanding a textile factory are faced with the problem of boiler selection.
Except for steam demanding, textile plants also need higher temperature heat source for printing, dyeing and hot-pressing sections, where thermal oil heaters will be used to heat the thermal oil to above 300°C high temperature, after the thermal oil are used for heat consuming machines, it will come back to boiler for circulating using. So, steam boiler and thermal oil heater combination is commonly used in textile plants, ZOZEN already provided completed solutions for over 50 customers.
The production process of liquid dairy products mainly includes: raw milk acceptance, milk cleaning, refrigeration, preheating, homogenization sterilization, cooling, aseptic filling, fermentation, final product storage etc. Steam boiler is used for fermentation, disinfection, drying, etc., The sterilization of liquid dairy products and the fermentation process of sour milk are the main uses of the boilers in dairy plants. According to the experience from working with many dairy companies in the past, fermentation, disinfection and sterilization of dairy products is the main steam consumption sections. If heating and bathing heat are added, steam demand will be higher.
As the fast developing of chemical industry, there are many kinds of rubber product with similar producing process, mainly including: raw material preparing, Plastic refining, mixing, calendering, forming, vulcanizing etc., and most of these sections needs steam. Besides, some high temperature machines such as pressing, kneading, banbury machines, vulcanization molding, injection molding machine, cement mixer, conveyor belt dryer and molds heating and insulation also need thermal oil heater.
