The primary use of steam boiler in tire manufacturing is the vulcanizing process — the curing of the rubber needs steam to provide heat energy. Curing is a process in which chemical or physical action takes place for harder, tougher and more stable linkage.
As we know tires are the most important part of our vehicle because in all the parts of vehicle tires only remain in contact with the earth hence tires carry all the load of vehicle and passengers.
Vulcanization is a p...
Today, there are two main types of green boilers used in different industries: biomass boilers and condensing boilers. Each of these operates in completely different ways to reduce your carbon footprint.
Biomass Boilers
Biomass boilers operate by burning wood and other renewable organic materials to produce heat. There are automatic biomass boilers that control the amount of air and fuel that is used, making them even more efficient. To keep this boiler running, owners will need ample ...
Water quality is of the utmost importance in proper and safe boiler operations. An improperly treated feedwater system can result in the scaling of the boiler internals, safety equipment and auxiliary piping.
The integration of a biomass system is relatively simple. In most cases the systems are retro fitted and replace a fossil fuel boiler. The biomass boiler replaces the existing fossil fuel boiler, but the downstream heating system will remain the same, so there is no need to replace the radiators or whatever emitters are in place.
Although most people know their boiler will not last forever, many people treat it as it should. On average, your industrial boiler should last you anywhere from 20 to 25 years without any trouble. If you’re around year 15, you may be able to retrofit your boiler to update it with newer technology.
Shell boilers may be defined as those boilers in which the heat transfer surfaces are all contained within a steel shell. Shell boilers may also be referred to as "fire tube" or "smoke tube" boilers because the products of combustion pass through the boiler tubes, which in turn transfer heat to the surrounding boiler water.
The efficiency of a coal-fired boiler depends on the loss of the boiler, the best efficiency in the boiler can be achieved if the losses are kept to the minimum. Since 50% of the losses are dependent on the fuel and ambient condition, the best efficiency can be achieved by properly tuning the other 50%, i.e. mainly carbon loss and dry gas loss.
