High exhaust temperature in a biomass-fired boiler can be caused by several factors, including:
1. Insufficient air supply: If there is not enough air supplied to the combustion chamber, the fuel may not burn completely, resulting in high exhaust temperatures.
2. Excessive fuel supply: Excessive fuel supply can overload the boiler, causing incomplete combustion and high exhaust temperatures.
3. Improper combustion: Improper combustion can lead to incomplete fuel burning and high exhaust tempe...
A biomass-fired boiler furnace that has multiple issues such as wall cracks, deformation, coking, and tilt, loose bricks, tube wall blockage, burned-out rock wool sealing, and combustion chamber wall damage requires immediate attention to prevent further damage and potential safety hazards.
Firstly, it is recommended to shut down the boiler immediately to prevent any further damage and ensure the safety of the surrounding area. The boiler should not be restarted until all necessary repa...
Industrial steam boilers can produce noise for several reasons, including:
1. Combustion noise: Combustion noise is caused by the sound of the flames as they burn the fuel. This noise is typically louder during startup and shutdown, and can be reduced by optimizing the combustion process.
2. Boiler fan noise: Boiler fans are used to supply combustion air and to exhaust flue gases. The noise generated by the boiler fan can be reduced by installing a silencer or adjusting the fan speed.
3. Wate...
Circulating fluidized bed boiler is a type of boiler that uses circulating fluidized bed technology to burn solid fuels. It has several advantages:
1. High efficiency and energy-saving: circulating fluidized bed boiler uses circulating bed technology, where the particle material in the bed forms a circulating flow, effectively improving the heat transfer efficiency. As a result, the thermal efficiency of the boiler can reach more than 85%, and the energy-saving effect is significant.
2. Good c...
When selecting a steam boiler suitable for a clothing factory, the following parameters should be considered:
1. Boiler evaporation capacity: The required steam volume should be determined based on the production scale and process of the clothing factory, and a steam boiler with a suitable evaporation capacity should be selected.
2. Boiler rated pressure: A steam boiler with a rated pressure suitable for the production needs of the clothing factory should be selected.
3. Boiler thermal effici...
Flue gas flow rate in industrial boilers refers to the rate or volume at which flue gas flows inside the boiler. The calculation of flue gas flow rate is used to understand the combustion state and thermal efficiency of industrial boilers for optimization and improvement purposes.
The calculation of flue gas flow rate usually takes into account factors such as the temperature and pressure of the flue gas, the density of the flue gas, and the flow rate of the flue gas. The main purposes of calcu...
The circulating water flow rate is an important parameter for the efficient operation of hot water boilers. The calculation formula for the circulating water flow rate in hot water boilers is based on several factors, including the heat load, temperature difference, and flow rate. The formula can be complex and may vary depending on the specific boiler and application.
At ZOZEN Boiler, we understand the importance of reliable and efficient hot water boilers for your heating needs. Our W...
The forced draft fan and induced draft fan are two critical components of an industrial boiler that work together to maintain proper airflow and control the combustion process. The interlocking system between these fans is designed to ensure safe and efficient operation.
The interlocking system includes sensors and controls that monitor the airflow and pressure in the boiler. If there is a malfunction or issue with either the forced draft fan or the induced draft fan, the interlocking system wi...
