The reduction of nitrogen oxides in gas-fired boilers is mainly achieved by burners and increasing the furnace size of boilers. In order to help enterprises save costs and reduce nitrogen oxides in gas-fired boilers, low-nitrogen transformation can be realized by configuring appropriate low-nitrogen burners and staged combustion technology plus the flue gas internal circulation technology, and the emission can be controlled to be less than 30 mg/m3.
Reasonable arrangement of igniters in gas-fired boiler can not only obtain ideal ignition effect, but also save ignition fuel. However, due to the different types of fuel and burner, the igniter arrangement of gas boilers is different.
The gas-fired boiler is operated by an advanced combustion machine, equipped with automatic gas supply and ignition combustion system, and the gaseous fuel is easy to burn. Therefore, the gas-fired boilers need not be equipped with blower and induced draft fan components.
The ignition system of gas-fired boiler adopts high-energy igniter, which belongs to low-voltage capacitive discharge device. Its main structure is composed of nddh high-energy igniter, nddz igniter and nddl shielded ignition cable.
Ash accumulation on the heating surface.
The scaling and ash deposition on the water-cooled wall of the furnace and the ash deposition of the superheater, convention tube bundles, economizer and preheater can increase the thermal resistance of the flue gas, weaken the heat transfer, lessen the cooling effect of the flue gas and increase the exhaust gas temperature of the gas-fired boiler.
Too high excess air coefficient.
Under normal circumstances, as the furnace outlet excess...
At present, the research and development technology of gas boilers is very mature. The boiler has obvious advantages of stable operation and less pollutant discharge and energy saving. However, if the boiler is not used for a long time, it is necessary to maintain the boiler to maintain the normal operation at the subsequent startup.
As we all know, the stable operation of the natural gas boiler can significantly optimize the operation of the boiler, improve the efficiency of the boiler, and effectively reduce the operating cost of the boiler after effective maintenance. So, what factors will affect the stable operation of natural gas boilers?
Pickling is the main method for removing a large amount of oxidizing substances and corrosion products inside a gas boiler, and also has the effect of eliminating scale. The pickling process is usually carried out after 1-3 weeks of boiler operation.
