SZL series chain grate boiler can burn both the coal fuel and the biomass fuel. The boiler capacity is 4 tons to 35 tons. ZOZEN SZL series biomass-fired steam boiler has the advantages of compact structure, safe operation, high efficiency and sufficient output.
ZOZEN Boiler is a well-known industrial boiler manufacturer in China. With more than 30 years' development, ZOZEN Boiler has excellent team and advanced equipment, strong design and manufacturing strength with reliable boiler quality. ZOZEN Boiler owns gas-fired boilers, biomass-fired boilers, coal-fired boilers and thermal oil heaters, which are widely used in various industries.
ZOZEN DZL series packaged boiler is horizontal three-pass water and fire tube chain grate boiler with a wide fuel adaptability to biomass particles, bituminous coal, meagre coal and anthracite. The boiler proper is a longitudinal single drum. The threaded smoke tubes in the drum form the convention heating surface. The drum and water-cooled walls on both sides form the radiation heating surface in the furnace. The combustion equipment adopts the light chain grate. The boiler is reasonably arranged with primary air and secondary air, and is equipped with economizer and dust collector at the boiler end to control the NOx emission concentration below 200mg/m3. Meanwhile, the boiler realizes the stepless speed regulation of the grate via the electric control. There are also the absolute rating alarm and interlocking protection functions to make the boiler safer. It is widely used in the chemical, food, tobacco, textile, printing and dyeing, feed, medicine and building materials industries.
In the drum paring working area of ZOZEN Boiler, the steel plates finishing the rolling will accept the circular seam automatic welding here. After the polishing of welding seam, edge milling, chamfering and other pre-welding treatments, the floating rusts on the surface of steel plates are removed to avoid the generation of a large number of air holes in the welding seam, so as to ensure the welding quality.
A boiler hydrostatic test is a way in which pressure vessels such as pipelines, plumbing, gas cylinders, boilers and fuel tanks can be tested for strength and leaks. The main purpose of the hydrostatic test is to identify the tightness and compressive strength of the pressure components of the boiler, including but not limited to welding lines, flange joints and tube expansion joints, and visually observe the deformation of the pressure components. Practice has proved that the boiler hydrostatic test can detect defects in boilers, and the corresponding measures can be taken accordingly. Therefore, it is an important step and means to ensure the safe operation of the boiler.
Veolia (Harbin) Thermal Power Co., Ltd. was established in 2003 and is a Sino-foreign joint venture controlled by Veolia Group. ZOZEN customized a complete boiler system including multiple sets of WNS series gas-fired hot water boilers. This series of gas-fired boilers adopts full corrugated furnace to increases the strength and elasticity of the furnace and enhances the disturbance of the flue gas, effectively improving the heat transfer effect. The threaded fire tubes can effectively absorb the flame energy, and the heat transfer coefficient is 1.2 times higher than that of the ordinary tube. At the same time, the finned tube condenser added at the end of the flue can increase the boiler thermal efficiency to over 98%
Shenyang Third Thermal Heating Co., Ltd. is one of the largest companies of the central heating industry in Shenyang. The body and the middle partition wall of ZOZEN DHL series corner tube hot water boiler adopt membrane water wall complete sealing structure, which greatly reduces the boiler heat loss and improves the boiler thermal efficiency. Meanwhile, the flag heating surface of this series of boilers is designed with patented technology of the same smoke velocity in variable cross-section, so that the flow velocity of the smoke in heated surface between the high temperature zone and the low temperature zone is uniform, reducing the ash accumulation and increasing the heat transfer co-efficiency.
