All equipment (includes boiler proper, economizer, burner, valves, instrument, electric control cabinet, chimney, water treatment, soft water tank, energy-saving circulating pump, raw water pump, deaerator, etc.) is designed to be installed on one or two prepared concrete bases. Skid mounted boiler has all interconnecting piping completed and has passed the cold state test at the factory before delivery. After the boiler arrives at the site, it only needs to be connected to water, electricity and gas to operate.
On Christmas Eve 2019, General Manager Mr. Zhang Guoping signed an agreement with Shir Baz Kaminzada, CEO of Baheer group from Afghanistan on the papermaking steam boiler project and established a friendly and cooperative relationship. ZOZEN took another firm step towards the internationalization strategic goal! The heating and dissolving, machine shaping, black slurry concentration and squeeze drying of the chemicals in the pulping process all require heat sources, so the boiler is the main driving force for the production of the paper mill.
The boiler body of WNS series boilers adopts wet-back structure. The combustion, water level, temperature and steam pressure of the boiler are automatically adjusted and protected, which can realize fully automatical operation to ensure safety and reliability. The large-diameter corrugated furnace of this boiler ensures sufficient combustion of natural gas. Combined with an advanced low NOx burner, it can easily achieve the requirement of NOx≤30mg/Nm3. In addition, the boiler is also equipped with energy-saving equipment at the end of the boiler flue, so that the boiler thermal efficiency can reach over 98%.
SZS series boiler is designed with longitudinal double drums and " D " type chamber structure. The furnace is on the right and convection tube bank is on the left. The body is fixed on the basement by middle and both end flexible supports and make the boiler expand horizontally sideways. Around the furnace is membrane wall. Furnace and tube bundle are totally separated by the membrane wall at the left side of the furnace. The back part of convection tube bank is sparse shift structure, front part is aligned structure. Smoke from furnace outlet enters re-burning chamber, convection tube bank area, and then from left front part enters spiral fin coil economizer and condenser, and finally is discharged to atmosphere through chimney.
WNS series horizontal internal combustion boiler is a boiler shell type 3 passes wetback oil/gas fired boiler. After fuel is being atomized by burner, flame is full of the wave furnace and transfer heat via furnace wall, this is 1st pass; the high temperature smoke is collected in reversal chamber and then enters 2nd pass which is grooved tubes bundle area; after heat convection, air temperature gradually falls and goes to front smoke box and turn to 3rd pass, which is smooth tubes bundle area, and then enters chimney passing back smoke box and exhausted to the atmosphere.
