The boiler water film dust remover uses dust-containing gas to impact the inner wall of the dust remover or other special components, and forms a water film in some way, so that the dust in the flue gas is captured by the water film, thus purifying the gas.
New energy boiler fuel is a new clean and environmentally friendly fuel product. The fuel of new energy boiler is clean, sanitary, green and environmentally-friendly. No "three wastes" such as waste gas, wastewater and waste residue are discharged in the production process. It has high oxygen content, full incineration, no black smoke, no carbon deposit, no boiler black bottom, no residual liquid or residue. The waste gas from incineration is more than 80% lower than that of LPG.
The ignition system of gas-fired boiler adopts high-energy igniter, which belongs to low-voltage capacitive discharge device. Its main structure is composed of nddh high-energy igniter, nddz igniter and nddl shielded ignition cable.
The ASME Boiler & Pressure Vessel Code (BPVC) is an American Society of Mechanical Engineers (ASME) standard that regulates the design and construction of boilers and pressure vessels.
The construction and working principle of the boiler economizer is simple. At the bottom part, it has a horizontal inlet pipe through which we feed water with normal temperature to the economizer. There is another horizontal pipe fitted at the top of the economizer.
A boiler economizer (also known as an economizer) are mechanical devices intended to reduce energy consumption or perform a useful function such as preheating a fluid. A boiler economizer is essentially a heat exchanger that makes a system more energy efficient by taking enthalpy in fluid streams that are hot, but not hot enough to be used in a boiler – hence recovering more useful enthalpy and improving the steam boiler’s efficiency.
A steam boiler is a water containing vessel which transfers heat generated by a fuel source into steam, which is then piped and directed to points where it could be used while running industrial equipment. The basic idea here is to convert water to steam using a source of heat.
As their name implies, hot water boilers operate by being completely filled with hot water. On the other hand, steam boilers are usually only filled approximately 3/4th of the way full, while the top quarter is reserved for steam.
