The 3 sets of 29 MW gas-fired hot water boilers serving for Jin-an Thermal Power in Tianjin were installed in 2015. The boiler is a common type for central heating which adopts the full membrane wall structure and a D-type layout. It has the characteristics of micro-positive pressure combustion, no air leakage, low heat loss caused by exhaust gas and high thermal efficiency. During the boiler manufacturing process, ZOZEN Boiler emphasizes that the welding of each baffle must be tight, and the height of welding leg should meet the requirements specified on the design drawing to ensure the leakproofness of the boiler. In addition, ZOZEN Boiler also sets strict welding standards for detailed parts including the door opening and kiln eye to prevent the high-temperature flue gas from leaking.
ZOZEN WNS series oil-fired/gas-fired boiler is a kind of fire tube wetback boiler with a two-pass or three-pass structure. It is equipped with foreign advanced burner, economizer and condenser installed at the end of flue gas duct to lower the exhaust temperature to 60℃, achieve the thermal efficiency of over 98% and control the emission of NOx to less than 30mg/Nm3. It has the characteristics of compact structure, small covering area, short installation period, easy operation and complete automatic control system which can realize unattended operation.
This is ZOZEN thermal oil heater adopts the multi-circuit coil design with sufficient heating surface and good heat transfer effect which effectively protect the burner and furnace wall. The boiler adopts high-quality refractory and thermal insulation materials which can well reduce the heat loss based on the different refractory and thermal insulation structure for areas with different temperatures. In addition, based on the actual conditions, we also add the waste heat boiler, economizer, air pre-heater and other energy-saving equipment to make exhaust gas temperature to less than 90℃ and the thermal efficiency to reach over 95% and to help the enterprise reduce consumption and the costs.
This is gas-fired/oil-fired thermal oil heater from ZOZEN Boiler which is widely used in petroleum, chemical fiber, pharmaceutical, printing and dyeing and other industries that require high-temperature heating. The thermal oil heater adopts heat medium oil to transfer the heat energy. Applying high temperature of heat medium oil, the boiler can realize low pressure and high temperature heating with a working temperature of 320℃. Meanwhile, our thermal oil heater is equipped with the complete device for operation control and safety supervision which can precisely control the working temperature with convenient operation and high safety performance.
Binzhou Xinkeode Technology Co., Ltd. is a private enterprise engaged in the production and sales of neopentyl glycol, sodium formate and formaldehyde. According to the actual situation of Xinkeode’s production lines, ZOZEN Boiler recommended the SZS series gas-fired condensing boiler. This series of steam boiler adopts the large furnace design and advanced burner, which can ensure the sufficient combustion of fuel to improve the fuel use ratio. With the energy-saving equipment at the end of the gas duct, the boiler thermal efficiency can reach 98% and above to save the operating costs.
ZOZEN SZL series biomass-fired boiler has the characteristics of sufficient output and high thermal efficiency. To ensure the sufficient combustion of fuel and save the fuel costs, ZOZEN analyzes the characteristics of different fuels, and optimizes the feeding hopper, width and length of grate, grate rotating speed, secondary air inlet place and direction. ZOZEN also adopts the design of separate air chambers and air dampers to ensure the complete combustion of different biomass fuels and improve the boiler thermal efficiency to above 88%.
ZOZEN SZL series biomass-fired boiler can be fired by various kinds of fuel including biomass particles, wood chips, palm shells, straws and so on. The boiler body is composed of the chain grate and boiler proper with a packaged or pre-assembled structure. It is convenient for installation, so it can reduce the basic construction costs for customers. At the same time, in order to meet the boiler emission standards in different areas, ZOZEN Boiler can design the cyclone, wet scrubber and bag-type dust removal devices to lower the NOx emission to 200mg/m3.
The steam boilers in the hospital are mainly used for sterilization and have certain requirements for the quality and quantity of steam. This time, Shandong Jining Psychosis Prevention and Treatment Hospital purchased two sets of WNS series gas-fired steam boiler from ZOZEN Boiler. This series of boiler has a wide fuel adaptability including natural gas, coal gas, biogas and so on. It also adopts the large-diameter corrugated furnace to ensure the sufficient combustion of fuel and the high thermal efficiency of over 98%. Equipped with the imported low-nitrogen burner, it can easily realize the ultra low NOx emission.
