There are several ways to estimate the thermal efficiency of gas-fired boilers:
1. Direct method: This method involves measuring the amount of fuel consumed and the amount of heat produced by the boiler. By comparing these two values, it is possible to calculate the thermal efficiency of the boiler.
2. Indirect method: The indirect method involves measuring various parameters such as flue gas temperature, ambient air temperature, and fuel consumption, and then calculating the t...
The weight of the boiler is related to the transportation cost. When users need the logistics quotation, they must know the volume and weight of boiler. Then, ZOZEN will take the weight of 40-ton boiler as an example.
The 40-ton boiler weight includes all parts of the main body of the boiler, such as the weight of various structural steel, thermal insulation cotton, cement, bricks and so on. The weight of a 40-ton boiler naturally varies greatly due to different boiler structures and co...
How to select the right thermal fluid heater for your plant can be a tough task. With so many industrial heating equipment manufacturers and heater models on the market, it can be difficult to narrow down your options and make a decision.
It’s probably going to be tough to focus your full, uninterrupted attention on the task of choosing a new industrial thermal fluid heater for a long stretch of time. You’re going to need to make the best decision possible for your plant qui...
To guarantee the successful and efficient shell boiler operation, the user must:
1)Know the conditions, environment, and demand characteristics of the plant, and accurately specify these conditions to the boiler manufacturer.
2)Provide a boiler house layout and installation that promotes good operation and maintenance.
3)Select the control systems that allow the boiler to operate safely and efficiently.
4)Select the control systems that will support the boiler in supplying dry steam to the plant at the required pressure(s) and flowrate(s).
5)Identify the fuel to be used and, if necessary, where and how the fuel reserve is to be safely stored.
