A boiler economizer (also known as an economizer) are mechanical devices intended to reduce energy consumption or perform a useful function such as preheating a fluid. A boiler economizer is essentially a heat exchanger that makes a system more energy efficient by taking enthalpy in fluid streams that are hot, but not hot enough to be used in a boiler – hence recovering more useful enthalpy and improving the steam boiler’s efficiency.
The integration of a biomass system is relatively simple. In most cases the systems are retro fitted and replace a fossil fuel boiler. The biomass boiler replaces the existing fossil fuel boiler, but the downstream heating system will remain the same, so there is no need to replace the radiators or whatever emitters are in place.
Steam boilers use a contained heat system to generate steam. The steam travels through pipes in the building’s walls where they emerge at radiators in heating systems. The radiators warm from the steam’s heat. As the steam gives off its heat, it condenses back to liquid water and returns to the tank. A boiler system of this type that does not allow outside water sources is a closed system and is highly efficient for using all the condensed water. An open network may be required in operations where the steam or water gets contaminated in such a way that it cannot return to the boiler for reuse.
Low-pressure boilers operate at a lower pressure and reach lower temperatures than high-pressure steam boilers. Water in low-pressure boilers is not heated beyond 250ºF, and the steam pressure does not exceed 15 psi (pounds per square inch).
The oil-fired boiler refers to the boiler fueled by oil, including the diesel, waste oil and other fuel oil. The oil consumption of the oil-fired boiler affects the economic operation of the boiler.
In the operation of gas-fired steam/hot water boiler, it need continuous water supply to ensure the water volume in the drum. Once water shortage occurs, it will cause the boiler dry burning problem, which will further result in the boiler failure and other problems.
The coal-fired boiler has low fuel costs and high calorific value, which is a kind of important auxiliary heating equipment in the production-oriented enterprises. However, the coking on the furnace wall is common in the operation of the coal-fired boiler.
As the state environmental protection requirements become more and more strict, there are also relevant regulations and standards for boiler pollutant discharge. As a result, what is the sequential process of desulfurization and denitrification for the coal-fired boiler?
