ZOZEN 10-ton gas-fired steam boiler has the advantages of stable heat supply, good performance of energy conservation and low emission. The boiler body, economizer, condenser and other parts of ZOZEN 10-ton gas-fired steam boiler adopt the packaged delivery.
ZOZEN SZS series double drum vertical gas-fired watertube boiler is a typical medium and large-sized gas-fired boiler, with a capacity of 20-110t/h and a pressure of 1.25-5.3MPa, which meets the needs of steam and heating for most enterprises. According to the different performance parameters, ZOZEN SZS series gas-fired boilers can be divided into self-contained, assembled and shipped in bulk. The SZS gas-fired boiler shipped to Hebei this time was delivered in bulk, and the video shows the drum, an important pressure-bearing component of the boiler, which plays the role of steam-water separation.
WNS series and SZS series gas-fired steam/hot water boilers are the best-selling products of ZOZEN Boiler, which have the advantages of high thermal efficiency over 98%, emission of nitrogen oxides below 30mg/nm, excellent energy saving and environmental protection performance, and are well received by domestic and foreign markets. The capacity range of ZOZEN gas-fired steam/hot water boiler is 1-110 t/h and 0.7-116 MW, which can meet various production and heating needs of enterprises.
WNS series gas-fired steam boilers customized by ZOZEN Boiler have the advantages of high thermal efficiency, strong environmental protection performance and automatic operation. It is commendable that the WNS series gas-fired boilers adopt the patented appearance of ZOZEN Boiler (patent No. ZL202030031426), which has beautiful appearance and good corrosion resistance.
ZOZEN Boiler provided several sets of gas-fired steam boilers to the distributed energy resource park in Jiangsu Province, China. This industrial park used steam boilers for power generation and heating supply for the auto tyre producer. Therefore, ZOZEN Boiler customized several sets of boilers with different parameters to this project.
The 3 sets of 29 MW gas-fired hot water boilers serving for Jin-an Thermal Power in Tianjin were installed in 2015. The boiler is a common type for central heating which adopts the full membrane wall structure and a D-type layout. It has the characteristics of micro-positive pressure combustion, no air leakage, low heat loss caused by exhaust gas and high thermal efficiency. During the boiler manufacturing process, ZOZEN Boiler emphasizes that the welding of each baffle must be tight, and the height of welding leg should meet the requirements specified on the design drawing to ensure the leakproofness of the boiler. In addition, ZOZEN Boiler also sets strict welding standards for detailed parts including the door opening and kiln eye to prevent the high-temperature flue gas from leaking.
ZOZEN SZS series oil-fired/gas-fired boiler proper adopts the D-type structure. One side is the furnace, and the other side is the convection heating surface. The partition walls around the furnace body, the partition wall between furnace and convection section, and the front and rear walls all adopt the membrane wall structure. There are foreign advanced burner, economizer and condenser installed at the end of flue gas duct, which can lower the exhaust gas temperature to 60℃, achieve the thermal efficiency of over 98% and control the emission of NOx to less than 30mg/Nm3. This kind of boiler has the characteristics of energy saving and environmental protection, safety and efficiency, simple operation and maintenance, and fully automatic control system which can realize unattended operation.
The packaged structure is another characteristic of ZOZEN boiler. After the gas/oil-fired thermal oil heater is delivered to the project site, it can be put into use only by connecting the gas/oil, electricity, which can save a lot of installation costs. What's more, the boiler has the patented equipment to completely remove the moisture from the thermal oil heater after the hydraulic pressure test and reduce the oil dewatering time. Take the 6 million kcal as an example, it usually takes 10 days for oil dewatering while ZOZEN only needs 2 days, which reduces the 80% time for dewatering and directly save the costs for about 30,000 RMB.
