A well designed and operated biomass boiler burning fuel within the specification of the boiler should not produce any smoke, but black smoke may be produced if the fuel is too wet for the boiler. All biomass boilers produce some oxides of nitrogen (NOx), particularly nitrogen dioxide (NO2). While NOx emissions from gas boilers have been reduced significantly in recent years through the use of low NOx burners which burn at a temperature slightly below that at which NOx forms, the nature of biomass combustion, and the need to ensure the complete combustion of wood gases, means that combustion takes place at a temperature where atmospheric oxygen and nitrogen can chemically combine. The better the quality of the combustion control system on a biomass boiler, the lower the NOx emissions will be. In general, biomass boilers produce less NOx than oil boilers. Biomass boilers do not produce any oxides of sulphur (SOx).
Discharging high-temperature flue gas generated by a biomass-fired boiler efficiently and safely is crucial for boiler operation, environmental compliance, and energy recovery. These gases, if not handled properly, can lead to energy inefficiency and increase the emission of pollutants. ZOZEN Boiler, as a professional industrial boiler manufacturer, incorporates advanced technologies and strategies to manage and utilize high-temperature flue gases from biomass-fired boilers. Here's an overview o...
The impact of fuel on boiler performance is significant and multifaceted, affecting everything from efficiency and operating costs to maintenance requirements and environmental emissions. As a professional industrial boiler manufacturer, ZOZEN Boiler emphasizes the critical role that fuel quality and type play in the operational efficacy, longevity, and sustainability of boiler systems. Here's an overview of how fuel impacts boiler performance:
1. Efficiency and Heat ValueThe type and quality o...
Selecting a biomass-fired boiler for industrial applications involves careful consideration of various parameters to ensure efficiency, sustainability, and cost-effectiveness. Biomass boilers offer an eco-friendly alternative to fossil fuel-based boilers by utilizing renewable resources like wood chips, pellets, and agricultural waste. When choosing a biomass-fired boiler, pay attention to the following parameters:
1. Fuel Type and Availability:
Type of Biomass: The type of biomass fuel availa...
If the pumps of a coal-fired boiler are not absorbing water, it could be due to several reasons. It's essential to diagnose the issue accurately for an effective solution. Here are some common causes:
Air Locks in the Pump or Suction Line: If there is trapped air within the pump or the suction line, it can prevent the pump from creating the necessary vacuum to draw water.
Low Water Level in the Feed Tank: If the water level in the feed tank is too low, the pump may not have enough water to dra...
Biomass-fired boilers are increasingly popular due to their renewable and sustainable fuel source. However, like any combustion process, biomass boilers do produce emissions, including smoke and other gases, which can have environmental and health impacts if not properly managed.
What Are Biomass-Fired Boilers?Biomass boilers use organic materials, such as wood chips, pellets, or agricultural waste, as fuel to generate heat or electricity. They are considered more eco-friendly compared to fossi...
If the electric current of the circulating pump in a thermal oil heater is lower than the normal value, it may indicate a problem with the pump or the system. Here are some potential causes and solutions:
1. Low fluid level: If the thermal oil level is low, the pump may not be able to circulate the oil properly, leading to lower current readings. Check the fluid level and add more oil if necessary.
2. Clogged filter: A clogged filter can restrict the flow of thermal oil, causing the pump to wo...
High exhaust temperature in a biomass-fired boiler can be caused by several factors, including:
1. Insufficient air supply: If there is not enough air supplied to the combustion chamber, the fuel may not burn completely, resulting in high exhaust temperatures.
2. Excessive fuel supply: Excessive fuel supply can overload the boiler, causing incomplete combustion and high exhaust temperatures.
3. Improper combustion: Improper combustion can lead to incomplete fuel burning and high exhaust tempe...
