Here, we'll address four of the key mechanical benefits that serpentine coil heaters have to offer.
1. Coil Replacement
Coil replacement in serpentine industrial coil heaters is notably easier than that in helical coil heaters. With serpentine coil thermal oil heaters, you can replace one tube at a time instead of replacing the entire coil. This can save you thousands of dollars on the cost of purchasing a new helical coil in its entirety. Because the coil replacement can be taken care of quickly, you'll also save hundreds of thousands of dollars by avoiding excess facility downtime.
The circulating pressure of a thermal oil boiler is generated by the driving of the circulating oil pump to the thermal oil circulation. Generally, the working pressure of the thermal oil pump is 4 ~ 8kg / cm2. Actually, the pressure of the thermal oil pump differs from different working conditions.
What are the factors that affect the maximum pressure of thermal oil heater?
1. Pressure of circulating hot oil pump
The pressure of liqu...
1) The insufficient heating surface. In the process of retrofit design or improvement, increase the heating surface.
2) The particle size of the fuel is large, the screening characteristics do not meet the requirements, the material concentration in the suspension section is low, and the heat transfer coefficient is small, which makes the output unable to go up, or shows that the bed temperature is high and coal cannot be added. The solution is to improve the fuel preparation system and control...
As an important heat energy supply equipment, industrial boiler is widely used in food, electronics, paper making, building materials, textiles and chemical industries. According to the medium, industrial boilers can be divided into steam boilers, hot water boilers and thermal oil heaters. In order to solve the problem "How many tons are the rated thermal power of 42 MW of industrial boiler?" First of all, we need to know the basic knowledge of rated thermal power and unit ton.
Hot-water boiler is a kind of thermal equipment that uses the heat energy released by fuel combustion or other heat energy (such as electric energy, solar energy, etc.) to heat water to the rated temperature. According to different fuels, hot water boilers can be divided into gas-fired hot water boilers, oil-fired hot water boilers, biomass-fired hot water boilers, and coal-fired hot water boilers. How to choose hot water boiler? We will focus on the heating, pressure and thermal efficiency of hot water boiler.
The rated output of boiler refers to the maximum sustained output of industrial boiler under rated parameters (pressure and temperature) and certain efficiency. For steam boilers, the rated output is also called rated capacity, and the unit is t/h (tons/hour); For a hot water boiler, the rated output of the boiler is also called the rated thermal output, and its unit is MW.
MFT means the main fuel trip. To put it simply, when the protection signal is activated, the control system automatically cuts off the boiler fuel system and links the corresponding systems and equipment, so that the whole thermal system can be safely shut down, the boiler can be protected, and the fault can be prevented from further expanding.
Ash accumulation on the heating surface.
The scaling and ash deposition on the water-cooled wall of the furnace and the ash deposition of the superheater, convention tube bundles, economizer and preheater can increase the thermal resistance of the flue gas, weaken the heat transfer, lessen the cooling effect of the flue gas and increase the exhaust gas temperature of the gas-fired boiler.
Too high excess air coefficient.
Under normal circumstances, as the furnace outlet excess...
