There’s a lot to carefully consider when you’re upgrading or replacing your facility’s equipment. Thermal oils tolerate higher temperatures than water-based formulas without boiling or unduly increasing system pressure.
Thermal fluid heating, and thermal oil systems, in particular, have several advantages. These advantages include:
Efficient industrial heating is important for a variety of reasons – both within your facility and its daily operations, a...
How to select the right thermal fluid heater for your plant can be a tough task. With so many industrial heating equipment manufacturers and heater models on the market, it can be difficult to narrow down your options and make a decision.
It’s probably going to be tough to focus your full, uninterrupted attention on the task of choosing a new industrial thermal fluid heater for a long stretch of time. You’re going to need to make the best decision possible for your plant qui...
The term Thermal Fluid does not refer to a specific fluid, there are many. There are also many companies that produce a variety of Thermal Fluids.
The most common Thermal Fluids are either Mineral Oil based or Synthetic Oils. The various manufacturers typically produce a series of fluids that each has a recommended operating temperature range. Close consideration should be given to this operating range in selecting a fluid.
There are other considerations as well, consult with f...
According to the differences in fuel and structure, industrial thermal oil heaters are mainly divided into the oil/gas-fired thermal oil heater and coal/biomass-fired thermal oil heater. The basic configurations of the thermal oil boiler system generally are as follows.
If the hot oil pump of the fully automatic thermal oil heater is suddenly damaged and stops working during the operation, the boiler circulation will be blocked. If the fuel is still burning to make the oil temperature keep rising, it will cause the coking of the hot medium oil which is easy to cause a fire. If the fully automatic thermal oil heater catches fire due to the power cut during the operation, the boiler operator should quickly put out the fire in the furnace to stop the fuel from burning, and blow a large amount of cold air into the furnace to lower the temperature.
Thermal oil heaters have the characteristics of low pressure and high temperature. They adopt the special manufacturing technology and are equipped with tailor-made flue gas waste heat recovery systems, so they are energy-efficient with higher thermal efficiency than similar products on the market. They also have a high level of automation.
The thermal oil heater, also called organic heat carrier boiler, provides heat energy for production by heating the heat medium oil. It can realize the high-temperature and low-pressure heating without constant water supply. What are the characteristics of the thermal oil heater?
