When we talk about CFBC in the area of industrial boiler, it usually means the circulating fluidized bed combustion. The circulating fluidized bed (CFB) is a type of fluidized bed combustion that utilizes a recirculating loop for even greater efficiency of combustion.
There’s a lot to carefully consider when you’re upgrading or replacing your facility’s equipment. Thermal oils tolerate higher temperatures than water-based formulas without boiling or unduly increasing system pressure.
Thermal fluid heating, and thermal oil systems, in particular, have several advantages. These advantages include:
Efficient industrial heating is important for a variety of reasons – both within your facility and its daily operations, a...
EPA has promulgated national emission standards for hazardous air pollutants from three major source categories: Industrial boilers, commercial and institutional boilers, and process heaters. The final emission standards for control of mercury, hydrogen chloride, particulate matter (as a surrogate for non-mercury metals), and carbon monoxide (as a surrogate for organic hazardous emissions) from coal-fired, biomass-fired, and liquid-fired major source boilers are based on the maximum achievable control technology. In addition, all major source boilers and process heaters are subject to a work practice standard to periodically conduct tune-ups of the boiler or process heater.
The primary use of steam boiler in tire manufacturing is the vulcanizing process — the curing of the rubber needs steam to provide heat energy. Curing is a process in which chemical or physical action takes place for harder, tougher and more stable linkage.
As we know tires are the most important part of our vehicle because in all the parts of vehicle tires only remain in contact with the earth hence tires carry all the load of vehicle and passengers.
Vulcanization is a p...
The ASME Boiler & Pressure Vessel Code (BPVC) is an American Society of Mechanical Engineers (ASME) standard that regulates the design and construction of boilers and pressure vessels.
A condensing boiler can condense the water vapour in the flue gases and withstand the corrosive and acidic qualities of the flue gas condensate. Although most boilers can condense the flue gasses, only boilers that have heat exchangers constructed from materials able to withstand the corrosion should be used in condensing application. Condensing boilers with primary and secondary heat exchanger do not work well as they are not able to fully condense and defeat the purpose of using a condensing boiler. Also, boilers with this arrangement are prone to condensation in the primary heat exchanger at lower firing rate which can cause damage to the heat exchanger.
The special spray gun for pulverized coal boilers is a kind of equipment that atomizes fuel oil (light oil, heavy oil, residual oil, etc.) to make the fuel oil into UM-level particles. Through air distribution and ignition, the fuel oil can be sufficiently burned. It is widely used in the boiler industry.
Many business units are in contact with low-nitrogen boilers for the first time, and they do not have a good grasp of how to operate correctly and effectively extend the service life of the boiler. ZOZEN Boiler specializes in the production of low-nitrogen boilers, summarizing the following three techniques for extending the life of low-nitrogen boilers, helping users to better operate low-nitrogen boilers.
