Coal-fired boilers can be made more environmentally friendly through various methods:
1. Retrofitting with Emissions Controls: These can significantly reduce pollutants. Examples include scrubbers that remove sulfur dioxide, selective catalytic reduction systems that remove nitrogen oxides, and fabric filters or electrostatic precipitators that remove particulate matter.
2. Efficiency Improvements: Upgrading the boiler's heat exchange systems can increase the amount of energy t...
The boiler needs to blow off every day, and it is advisable to reduce the blowdown to below the boiler water level every time.
The boiler water level meter can record the boiler water level in detail, and the water level has a great influence on the boiler, so we should ensure that the boiler water level is within the normal range.
When the gas-fired boiler is running, there will be pressure inside, which can provide sufficient power for all kinds of production equipment. However, if the press...
Boiler steam pressure control refers to maintaining the steam pressure of boiler drum by adjusting the fuel control system. Its basic task is to adapt the heat provided by fuel combustion to the steam load of boiler drum. At the same time, it is necessary to ensure the safe and economic operation of boiler drum and meet the requirements of environmental protection.
The term Thermal Fluid does not refer to a specific fluid, there are many. There are also many companies that produce a variety of Thermal Fluids.
The most common Thermal Fluids are either Mineral Oil based or Synthetic Oils. The various manufacturers typically produce a series of fluids that each has a recommended operating temperature range. Close consideration should be given to this operating range in selecting a fluid.
There are other considerations as well, consult with f...
The thermal oil heater, also called organic heat carrier boiler, provides heat energy for production by heating the heat medium oil. It can realize the high-temperature and low-pressure heating without constant water supply. What are the characteristics of the thermal oil heater?
All thermal fluids expand as they are heated. The amount of expansion is based on the operating temperature, system volume and the coefficient of thermal expansion of the fluid. An expansion tank must be provided to accommodate the increased system volume at operating temperature.
NOTE: All fluids expand at a different rate.
