Binzhou Xinkeode Technology Co., Ltd. is a private enterprise engaged in the production and sales of neopentyl glycol, sodium formate and formaldehyde. According to the actual situation of Xinkeode’s production lines, ZOZEN Boiler recommended the SZS series gas-fired condensing boiler. This series of steam boiler adopts the large furnace design and advanced burner, which can ensure the sufficient combustion of fuel to improve the fuel use ratio. With the energy-saving equipment at the end of the gas duct, the boiler thermal efficiency can reach 98% and above to save the operating costs.
ZOZEN WNS series gas/oil-fired steam boilers have outstanding eco-friendly performance. The flue gas emission of WNS series gas/oil-fired steam boilers can meet the environmental protection standards. Facing the strict low NOx emission requirements across the country, ZOZEN Boiler realizes the low emission of NOx (less than 30mg/Nm3) via the advanced low-nitrogen burner and combustion technology. ZOZEN WNS 20 tph steam boilers are applied in the food, chemical and nonferrous metal industries.
ZOZEN energy-efficient WNS series gas/oil-fired steam boilers have two-pass and three-pass structures. This series of boilers adopt the large-diameter corrugated furnace and threaded smoke tubes with high heat transfer efficiency. With the economizer at the end of the flue gas duct, they can enlarge the boiler's heating surface, lower the exhaust gas temperature to 60℃ and improve the boiler's thermal efficiency to over 98%. ZOZEN WNS 8 tph steam boilers are applied in the food, chemical and heating industries.
In response to increasingly serious environmental problems, Ji Xiang Ju Food decides to purchase low NOx and eco-friendly gas-fired steam boiler. To meet the new requirements, ZOZEN Boiler customizes the boiler system and recommends SZS series low NOx steam boiler to ensure the sufficient heat supply for Ji Xiang Ju Food's production line. This series of gas-fired boiler adopts D-model full membrane wall structure and combustion chamber adopts narrow-spacing tube membrane wall with good air impermeability to reduce heat loss and enhance the thermal efficiency to 98% and above with the economizer at the end of flue gas duct.
All equipment (includes boiler proper, economizer, burner, valves, instrument, electric control cabinet, chimney, water treatment, soft water tank, energy-saving circulating pump, raw water pump, deaerator, etc.) is designed to be installed on one or two prepared concrete bases. Skid mounted boiler has all interconnecting piping completed and has passed the cold state test at the factory before delivery. After the boiler arrives at the site, it only needs to be connected to water, electricity and gas to operate.
The boiler body of WNS series boilers adopts wet-back structure. The combustion, water level, temperature and steam pressure of the boiler are automatically adjusted and protected, which can realize fully automatical operation to ensure safety and reliability. The large-diameter corrugated furnace of this boiler ensures sufficient combustion of natural gas. Combined with an advanced low NOx burner, it can easily achieve the requirement of NOx≤30mg/Nm3. In addition, the boiler is also equipped with energy-saving equipment at the end of the boiler flue, so that the boiler thermal efficiency can reach over 98%.
In recent years, Jinxi Petrochemical has accelerated its pace of development and is in urgent need of introducing a high-efficient and energy-saving boiler system. Regarding the actual production needs of Jinxi Petrochemical, ZOZEN recommended the safe and efficient SHL series field assembled water tube steam boiler and tailored the boiler system technical solution. This series of boilers has wide coal adaptability, the boiler water circulation adopts all-natural circulation, and each heating surface has relatively independent down comers to supply water, ensuring the safety of the overall water circulation. The large furnace design can extend the residence time of the flue gas in the furnace to make the full combustion of the fly ash and combustible gas. In addition, the flag pattern heating surface absorbs the temperature of the flue gas to a large extent, which improves the thermal efficiency of the boiler.
Wood processing is molding the wood under the action of a mould after being softened, bending the curve shape that the design requires, the following procedure is drying and shaping. In this case, wood cannot be heated and shaped by fire, therefore, heating and softening the wood by steam has been the only choice.
The new generation biomass-fired boiler, which is designed and developed by ZOZEN, has optimized the design of the feeding hopper, the length and width of the fire grate, rotary speed of gearbox, 1st and 2nd air ratio, vapor orientation and position, etc; these methods not only take the lead in solving the above problems, but also ensure the full combustion and the thermal efficiency can reach up to 88%; in addition, ZOZEN biomass-fired boiler adopts appropriate heat resisting grate bars, which effectively improve the reliability of the boiler and ensure the stable running of the boiler for a long time.
