How to measure the consumption of heat transfer oil in the hot oil boiler?

Boiler is widely used in factory power, building heating, people's life and other aspects, and is in great demand. Hot oil boiler is an important category of industrial boiler, which uses heat transfer oil as medium for heating. So how to measure the consumption of heat transfer oil in the hot oil boiler? Here, ZOZEN Boiler will answer.

How to measure the heat transfer oil?

How to measure the consumption of heat transfer oil in the hot oil boiler is mainly related to the boiler body, high and low oil tanks and oil pipelines. It needs scientific calculation, or you can directly consult the heat-transfer oil boiler manufacturer, and an accurate figure will be given according to the boiler system.

How to measure the heat transfer oil boiler during operation can be calculated according to the formula [hot oil furnace circulation = flow × time× 90%]. See the actual measurement result of heat transfer oil flowmeter for the flow rate.

In order to solve the problem of how to measure the heat transfer oil boiler, ZOZEN heat transfer oil boiler is equipped with expansion operation low level alarm to remind users to replenish heat transfer oil in time. When the system needs to supplement the organic heat carrier during the normal operation of the boiler, the cold organic heat carrier should be injected into the expansion tank first, and then indirectly input into the main circulation loop of the system.

ZOZEN Boiler provides professional heat conduction oil furnace solutions.

ZOZEN Boiler is a large-scale manufacturing enterprise with A-level boiler manufacturing license. The company has intelligent production base, advanced tooling and equipment, and perfect management system, which ensures that every boiler is produced with ingenuity, and can give professional guidance on how to measure heat transfer oil boilers. The products produced by ZOZEN Boiler include oil-fired gas-fired hot oil boiler and coal-fired and biomass-fired thermal oil heater with a capacity of 1.2-25 million kcal, a working temperature of 320℃ and a thermal efficiency of over 95%.

1. Energy saving and environmental protection. ZOZEN Boiler has made in-depth research on low-nitrogen combustion technology. The gas-fired heat-transfer oil boiler produced by ZOZEN Boiler can adopt low-nitrogen burner, and the emission of nitrogen oxides does not exceed 30mg/Nm³, meeting the emission standards of boilers in key areas at present.
2. Around the body and the front and rear (or upper and lower) door covers, our company designs fire-resistant insulation structures with different thicknesses according to different temperature areas, so that the external temperature is better than GB standard requirements.
3. The supporting equipment at the rear of the furnace body includes waste heat boiler, economizer, air preheater, steam generator, heat-conducting oil and flue gas integrated waste heat boiler, etc. Customers can choose appropriate supporting equipment according to their own process characteristics.
4. Greatly reduce the oil boiling time on site, with high heat transfer efficiency and stable output.
5. Fully automatic operation is achieved, and the actual utilization rate of heat energy is maximized.
6. Safety accessories are complete. All necessary safety devices such as temperature measurement, pressure measurement, nitrogen filling, etc. are designed and installed on the furnace body and oil inlet and outlet pipelines, and special procedures for boiling oil are designed in the control program to ensure safe use.