Which manufacturer of steam boiler for concrete curing is better?

With the strengthening of the awareness of cultivated land protection, the state has issued a policy of prohibiting the production of clay solid bricks all over the country, and some enterprises that produce and process clay solid bricks have gradually transformed and started to produce new wall building materials-aerated concrete, whose production cost and quality are much better than those of clay solid bricks. Therefore, aerated concrete blocks have become the development direction of new building materials in the future. The demand for steam boilers for curing concrete has also increased substantially. As a professional manufacturer of steam boiler for concrete curing, ZOZEN Boiler is here to recommend a special steam boiler solution for concrete curing.

ZOZEN Boiler of steam boiler manufacturer for curing concrete

Aerated concrete is a lightweight porous silicate product made of siliceous materials (sand, fly ash, siliceous tailings, etc.) and calcareous materials (lime, cement) as main raw materials, mixed with air-entraining agent (aluminum powder), through the process of proportioning, stirring, pouring, pre-curing, cutting, autoclaving and curing. It is named aerated concrete because it contains a large number of uniform and fine pores after being aerated.

The manufacturer of steam boiler for concrete curing is deeply involved in the boiler industry, and it is known that autoclaving curing process is an important process for autoclaving aerated concrete blanks. The steaming operation will have a direct impact on the finished product rate. Generally speaking, the proper temperature for autoclaved curing of aerated concrete is above 175℃, and steam boilers can be used to provide heat energy for autoclaves, pre-curing kilns and other thermal equipment.

As a domestic steam boiler manufacturer for curing concrete, ZOZEN Boiler has developed a number of technologies for aerated concrete industry, such as air preheating, condensate recovery, waste steam waste heat utilization, etc., aiming at the characteristics of the industry. Air preheating gas steam boiler came into being. The air preheating boiler developed by ZOZEN Boiler has both high quality and high performance. At the same time, according to the actual process conditions, ZOZEN Boiler is committed to recommending the appropriate furnace type and tailoring the system scheme for users.

Boiler type recommendation of steam boiler for curing concrete

The air preheating boiler developed by ZOZEN Boiler, a steam boiler manufacturer for concrete curing, has high safety and good stability. The boiler has an advanced boiler control system, equipped with boiler water level, steam pressure control, alarm and interlocking devices to ensure the safety of boiler operation. In addition, a large amount of condensed water will be recovered in the aerated concrete industry. ZOZEN Boiler reduces the exhaust temperature by air preheater and economizer, thus achieving the purpose of energy saving and emission reduction.

With its excellent quality and outstanding performance advantages, ZOZEN Boiler has reached cooperation with many aerated concrete enterprises such as Anhui Guangrun New Building Materials, Shenzhen Hongda Light Wall Materials, Shandong Shengze New Building Materials, Qingdao Puleshi Chuangneng New Materials, etc., and has become a steam boiler manufacturer for concrete curing that users unanimously trust.

1.WNS series gas steam boiler:

WNS series horizontal internal combustion full-wet-back gas boiler is divided into two types: two-return and three-return. The domestic advanced corrugated furnace liner and self-developed threaded flue pipe are adopted to effectively improve the overall thermal efficiency of the boiler.

Capacity: 1-20 t/h

Working pressure: 0.7-2MPa

Thermal efficiency: over 98%

Applicable fuels: natural gas, coke oven gas, biogas, etc.

2. SZS series gas saturated steam boiler

ZOZEN SZS series boilers are double-drum, vertical, D-shaped chamber combustion structure, and the combustion chamber adopts narrow-pitch tube membrane wall, which has good air tightness, reduces heat loss and improves the comprehensive thermal efficiency of the boiler.

Capacity: 2-110 t/h

Working pressure: 1.25-5.3mpa.

Thermal efficiency: over 98%

Applicable fuels: natural gas, coke oven gas, blast furnace gas, carbon black tail gas, biogas, etc.