velankanni company boiler wanted, entering the australian market, ZOZEN boiler signed an agency agreement with australian discoverchina

With emission requirements changing every day, it is also important to make sure that you are proactive when selecting equipment that will comply with future air regulations. Zozen Boiler has the most experience in selecting boiler equipment that will meet current and future NOx requirements.

The after-sales service of boilers is the issues that users are very concerned about. ZOZEN is fully aware that in the current time when the homogenization of boiler products is serious, after-sales service is the core competitiveness to effectively open the gap between various boiler manufacturers. In the face of every problem encountered in the use of users' boilers,ZOZEN will regard it as their own responsibility, establish a comprehensive after-sales mechanism, responds quickly, and effectively solve problems for users.

ZOZEN molten salt heaters use molten potassium nitrate and sodium nitrite as heating media. Molten salt heater will heat the powder salt over the melting point until the viscosity of the molten salt allows circulating pump works, after the whole system is under circulating condition, then feed then into the thermal fluid heater for further circulating rising temperature to make it to be recycling used. Normal media working temperature is 400-550℃, top working temperature could reach 600℃, velankanni company boiler wanted.

velankanni company boiler wanted, With thermal efficiency over 82% and NOx emissions less than 100mg/Nm3, ZOZEN DZL series boilers feature high efficiency and low emissions. They adopt single-drum structure and a chain grate. The heat transfer coefficient of threaded smoke tubes is 1.8 times higher than ordinary tubes. In order to expand the capacity, PT. New Hope Indonesia introduced ZOZEN DZL series coal-fired steam boiler to provide efficient and reliable heat source guarantee for feed production. 

The grate bracket adopts double brackets, the lower channel steel, the upper light rail, the upper heat, the lower force, which has changed the structure of the traditional grate bracket angle steel plus friction bar, the grate bracket is not deformed. The active stoker is operated on the light rail and it is tested in the cold state for 48 hours before leaving the factory. Never run sideways, stuck, which ensure the smooth operation of the stoker.

In terms of pre-welding treatment, ZOZEN can be said to keep improving. The three processes of grinding and rust removal, edge milling, and vertical chamfering eliminate a large number of blowholes in the weld and ensure welding quality.

If you’re looking for more information about industrial boiler maintenance, ZOZEN has put together a checklist for you. Implementing routine boiler maintenance can result in operational efficiency, cost savings and safer work conditions for your company.