oil heat exchanger, ZOZEN boiler fully upgrades the design of heating boiler room to reduce heating energy consumption

The primary purpose of the boiler is to supply energy to the facility's operations – for comfort heating, manufacturing process, laundry, kitchen, etc. The nature of the facility's operation will dictate whether a steam or hot water boiler should be used. Hot water is commonly used in heating applications. Under these conditions, there is a wide range of ZOZEN hot water boiler products available.

Recently, three sets of customized ZOZEN gas-fired boilers have been delivered after passing the quality tests. The boilers will enter the installation phase in late March when arriving at the UYUNI port.This project is located at the Uyuni Salt Flat, the largest salt flat in the world with the largest lithium reserves. Once the installation is completed, the boiler project will provide a reliable heat source for the new plant of YLB and assist the development and commercialization of salt-flat resources.

ZOZEN’s YQ(Y)W series oil-fired/gas-fired vertical thermal oil heater adopts three-pass round coil structure whose end adopts conical coil which can effectively protect the furnace wall at the end of boiler. It is equipped with advanced combustion device with good energy saving and environmental protection performance. This kind of boiler has the characteristics of wide fuel adaptability, low pressure and high temperature, safety and efficiency, high thermal efficiency over 95%, and complete automatic control system which can realize unattended operation, oil heat exchanger.

oil heat exchanger, The process of dyeing, drying, pressing, sizing, printing and dyeing, shaping and other processes in the textile industry are supported by the steam generated from industrial boilers. SOORTY is one of the largest denim manufacturers in Pakistan. ZOZEN left a deep impression on SOORTY with its energy-efficient steam boiler system solution, and provided the company with one set of 10 tph SZL series coal-fired steam boiler. 

The main advantage of ZOZEN’s circulating fluidized bed boiler lies in the direct control of pollutant emission during the combustion process. This type of boiler adopts low-temperature combustion technology. The temperature of normal boiler furnace is as high as 1400-1500°C during combustion, while that of circulating fluidized bed boiler furnace is within a lower temperature range of 800-900°C, which reduces the production of nitrogen oxides (NOx); meanwhile, by adding low-cost limestone to circulating fluidized bed boiler, sulfide (SOx) can be removed during fuel’s combustion.

ZOZEN is the first in China to adopt arched tube sheet and threaded smoke tube structure. Threaded smoke pipe is a high-efficiency heat transfer element researched by ZOZEN for many years. After continuous optimization, its heat transfer coefficient is 1.8 times higher than that of ordinary smoke pipe, which increases heat conduction, oil heat exchanger.

ZOZEN will always adhere to technology research and development, and continue to provide efficient and energy-saving boiler systems for enterprises, further contributing to the high-quality development of the domestic fine chemical industry.