3 0m kcal per hour thermal oil boiler for factory, As a well-known industrial boiler brand, ZOZEN Boiler can answer all your questions

3 0m kcal per hour thermal oil boiler for factory, It is known that the whole sales network of ZOZEN Boiler includes three main lines. The southern line goes through India, Laos, Vietnam, Thailand, Philippines, Malaysia, Indonesia and other countries, across the Asia and to Oceania, and settles in Australia, Papua New Guinea, New Zealand and other countries. The northern line reaches to Mongolia, Russia, Kazakhstan and other eastern European regions. The western line passes Pakistan, Oman, Ethiopia to South Africa, the rainbow country at the southernmost point of African continent. ZOZEN also builds local service centers in Thailand, Indonesia, Philippines and other countries to quickly respond to the demands of customers.

ZOZEN vertical lathe can maintain high working accuracy for a long time

The condensate water draining performance plays an essential role in the normal operation of gas-fired boiler to prevent the emission of steam when condensate water, air and carbon dioxide are discharged. Intended to realize a better effect of water draining and steam holding, ZOZEN Boiler’s technical team improved the original boiler structure for excellent condensate water draining performance to reduce energy consumption and cut down production cost for the enterprise.

3 0m kcal per hour thermal oil boiler for factory, ZOZEN molten salt heaters use molten potassium nitrate and sodium nitrite as heating media. Molten salt heater will heat the powder salt over the melting point until the viscosity of the molten salt allows circulating pump works, after the whole system is under circulating condition, then feed then into the thermal fluid heater for further circulating rising temperature to make it to be recycling used. Normal media working temperature is 400-550℃, top working temperature could reach 600℃.

The grate bracket adopts double brackets, the lower channel steel, the upper light rail, the upper heat, the lower force, which has changed the structure of the traditional grate bracket angle steel plus friction bar, the grate bracket is not deformed. The active stoker is operated on the light rail and it is tested in the cold state for 48 hours before leaving the factory. Never run sideways, stuck, which ensure the smooth operation of the stoker, 3 0m kcal per hour thermal oil boiler for factory.

3 0m kcal per hour thermal oil boiler for factory, A complete boiler has to go through many processes. The common boiler manufacturing processes include: blanking, mark transplantation, machining, assembly, welding, expansion, heat treatment, pressure test, non-destructive testing, anti-corrosion treatment, etc. ZOZEN Boiler has various kinds of automatic and digital equipment, sufficient semi-finished products stocking and good supplier relations, which can greatly shorten the supply cycle. All of ZOZEN packaged boilers meet the 30-day delivery demand.

ZOZEN’s YLW series coal-fired/biomass-fired thermal oil heater has wide fuel adaptability to various kinds of coal and biomass. The boiler’s heat exchange surface adopts square coil structure with more sufficient heating surface and higher thermal efficiency. With the flue gas waste heat system, the thermal efficiency can reach to 85%. Meanwhile, advanced measurement and control systems of oil temperature, smoke temperature and oil pressure can ensure the long-time and stable operation of the thermal oil heater. ZOZEN has successfully provided the stable heat source for the forming and drying processes in the production of laundry soap, bath soap and other products of Azhar Corporation (Pvt) Ltd..

In recent years, attention to environmental protection and sustainable development has been raised to a new height. Both Lenzing Group and ZOEN Boiler are constantly practicing the concept of sustainable development. There may still be new challenges in the future, but as a large-scale enterprise with social responsibility, ZOZEN Boiler will continue to insist on technological innovation and work with partners to achieve the unified development of economic, environmental and social benefits.