industrial boiler prices, Wuxi ZOZEN boiler actively explores and develops boilers that can meet the high standards of nox emissions

The price of fuel is constantly fluctuating and with it comes creative ways to be more economical. Finding methods to be more energy efficient is never a waste of time. In the boiler room, efficiency improvements can be found by many sources, however, a common option for energy savings includes the use of an economizer. NOW, ZOZEN will help introduce the economizer. The economizer is a fabricated assembly of finned tubing that captures waste heat extracted from the boiler’s stack flue gases the exhaust that leaves the boiler stack.

The ZOZEN WNS series oil-fired steam boiler was successfully delivered to the capital of Caracas, Venezuela in early June. After completing the installation and commissioning the boiler will provide a stable heat source for the production line of Inversiones Goa 7 C.A, further enhancing the efficiency and overall competitiveness of the enterprise.

The YQW series gas-fired organic heat carrier boiler adopts a three-pass round coil structure. The coil end adopts a necked coil which can effectively protect the furnace wall at the boiler end. It is equipped with the advanced combustion device and automatic boiler operation system. The flame formed by the fuel combustion fills the round coil and transfers the radiant heat via the coil wall, which is the first pass. The high-temperature flue gas generated by combustion gathers at the rear furnace door and turns into the second pass where is the convention tube bundles area. After the convection heat exchange, the flue gas gradually cools down and then turns into the third pass via the front furnace door where is the bundles area. Finally, the flue gas passes the economizer and is exhausted into the atmosphere via the chimney.

The main advantage of circulating fluidized bed boilers lies in the direct control of pollutant discharge during the combustion process. This type of boiler adopts low-temperature combustion technology. The furnace temperature of a conventional boiler is as high as 1400-1500°C during combustion, while the furnace temperature of a circulating fluidized bed boiler is in the lower range of 800-900°C, which can reduce the generation of NOx; meanwhile, SOx can be removed during fuel combustion by adding low-cost limestone in the circulating fluidized bed boiler.

industrial boiler prices, In terms of welding technology, ZOZEN longitudinal and circumferential seam welding adopts advanced automatic submerged arc welding technology, and 100% X-ray detection is carried out on the welding seam to ensure the welding quality. The welding of the smoke tube and tube sheet adopts pre-expansion first to eliminate the gap between the tube and tube sheet, and then adopts the automatic argon arc welding technology, which can effectively eliminate the stress and extend the service life of the boiler.

Jindal Group is a world-renowned manufacturer and supplier of steel pipe products and fittings. With the increasing expansion of the sales network, Jindal planned to build a ductile iron pipe production plant with an annual installed capacity of 350,000 tons in Abu Dhabi, UAE, and was ready to supplement the production capacity of DI pipelines. As the thermal energy equipment of the factory, the boiler was an essential part in the construction of the factory. Jindal’s project manger learned that many Indian companies had cooperated with ZOZEN Boiler, so he immediately contacted ZOZEN Boiler. Considering that the UAE is a country with abundant natural gas resources and thereby gas-fired boiler is the preferred choice, ZOZEN finally recommended the energy-saving and eco-friendly WNS series gas-fired boiler for Jindal Group.

Be it a firetube, watertube, hot water, or steam boiler, they are all effective and efficient in their own unique ways. To learn in more detail about the differences between boiler types, visit the section on ZOZEN website, industrial boiler prices.