ZOZEN SZS series gas-fired and oil-fired steam boiler has the advantages of high efficiency and energy saving. This series of boiler adopts double drum with full membrane structure. The SZS series boiler adopts flue gas backflip technology, with the economizer and condenser to improve the thermal efficiency to 98% and above.
The steam boilers in the hospital are mainly used for sterilization and have certain requirements for the quality and quantity of steam. This time, Shandong Jining Psychosis Prevention and Treatment Hospital purchased two sets of WNS series gas-fired steam boiler from ZOZEN Boiler. This series of boiler has a wide fuel adaptability including natural gas, coal gas, biogas and so on. It also adopts the large-diameter corrugated furnace to ensure the sufficient combustion of fuel and the high thermal efficiency of over 98%. Equipped with the imported low-nitrogen burner, it can easily realize the ultra low NOx emission.
ZOZEN SZS series steam boiler is a kind of D-type chamber structure boiler with longitudinal double drums. It has a big combustion chamber equipped with the low emission burner to effectively reduce the NOx. It also adopts the full membrane tube wall structure and pressurized combustion without smoke mixture.
ZOZEN 10 tph SZL series steam boiler is widely applied in the nonferrous metals, pharmaceutical, printing and dyeing and other industries. The SZL series coal-fired/biomass-fired steam boiler is packaged or shop-assembled boiler with double drums and a chain grate stoker structure. The 4-6 tph boiler is a packaged structure and the 6-35 tph boiler is a shop-assembled structure. It is composed of 2 parts. The upper part is heat absorbing surface and the lower part is combustion equipment.
Recently, ZOZEN took a field trip at the project location of the WNS boiler. The ZOZEN WNS series gas-fired steam boilers are horizontal wetback fire-tube boilers which have reasonable internal structure. An advanced low NOx burner is equipped with the boiler to reduce the NOx emission to less than 30mg/Nm3. At the same time, the burner can realize automatic air adjustment, which can ensure the sufficient fuel combustion.
All equipment (includes boiler proper, economizer, burner, valves, instrument, electric control cabinet, chimney, water treatment, soft water tank, energy-saving circulating pump, raw water pump, deaerator, etc.) is designed to be installed on one or two prepared concrete bases. Skid mounted boiler has all interconnecting piping completed and has passed the cold state test at the factory before delivery. After the boiler arrives at the site, it only needs to be connected to water, electricity and gas to operate.
Bolivia is the highest average altitude country in the world, local Bolivian companies have higher requirements for boilers than general boilers. As the altitude increases, the atmospheric pressure and the air density decrease accordingly, which adversely affects boiler combustion.
In view of this situation, ZOZEN technical team makes adjustments from the combustion system and exhaust system of boiler, fully considering the influence of low air pressure on boiler body design and combustion. By appropriately increasing the volume of the furnace to extend the residence time of the fuel in the furnace, and the problems of slow fuel burning speed and long burning time are solved.
