A well designed and operated biomass boiler burning fuel within the specification of the boiler should not produce any smoke, but black smoke may be produced if the fuel is too wet for the boiler. All biomass boilers produce some oxides of nitrogen (NOx), particularly nitrogen dioxide (NO2). While NOx emissions from gas boilers have been reduced significantly in recent years through the use of low NOx burners which burn at a temperature slightly below that at which NOx forms, the nature of biomass combustion, and the need to ensure the complete combustion of wood gases, means that combustion takes place at a temperature where atmospheric oxygen and nitrogen can chemically combine. The better the quality of the combustion control system on a biomass boiler, the lower the NOx emissions will be. In general, biomass boilers produce less NOx than oil boilers. Biomass boilers do not produce any oxides of sulphur (SOx).
The slag produced by a biomass-fired boiler can be reused to avoid energy waste and environmental pollution. There are many ways to reuse the slag. For example, the slag can be used to improve soil and improve soil performance. If it contains potassium carbonate and organic matter, it can also be used to produce compound fertilizers. In addition, the slag is a kind of plant ash, it is also a good thermal insulation material for steelmaking.
Biomass boilers do produce emissions when they burn organic materials such as wood chips, pellets, or agricultural waste. The exact type and amount of emissions depend on various factors such as the type of fuel used, combustion efficiency, and air pollution control technologies in place. However, with proper design and operation, biomass boilers can emit significantly less pollutants than traditional fossil fuel boilers, making them a more environmentally friendly option for heat and power...
A biomass-fired boiler furnace that has multiple issues such as wall cracks, deformation, coking, and tilt, loose bricks, tube wall blockage, burned-out rock wool sealing, and combustion chamber wall damage requires immediate attention to prevent further damage and potential safety hazards.
Firstly, it is recommended to shut down the boiler immediately to prevent any further damage and ensure the safety of the surrounding area. The boiler should not be restarted until all necessary repa...
As we all know, the transportation cost is generally related to the weight of the boiler, so how much does a 4-ton boiler weigh? How much steel does it contain? According to the fuel, 4-ton boilers are divided into 4-ton gas-fired boilers and 4-ton coal-fired and biomass-fired boilers. The amount of steel used for small-scale coal-fired and biomass-fired boilers is generally 5-7 times of the boiler output (excluding the front and rear arches), and about 25 tons for 4-ton boilers.
For the dust removal of biomass boiler, centralized or decentralized dust removal system are generally selected according to the process flow, and available dust can be recovered as much as possible under the conditions of process permission. The core of dust removal system is various types of dust collectors, including bag filter, electrostatic filter and electric bag filter.
Woodchips are small to medium-sized pieces of wood formed by cutting or chipping larger pieces of wood such as trees, branches, logging residues, stumps, roots, and wood waste. Woodchips may be used as a biomass solid fuel and are raw material for producing wood pulp.
The answer is yes. The bagasse boiler is a distinctive biomass boiler. According to its specific application, it can also be said to be a bagasse biomass power generation boiler. The bagasse boiler is mainly used for power generation, especially large-scale bagasse biomass boiler equipment, such as 75 tons/hour bagasse power generation boiler, 150 tons bagasse boiler, and 180 tons power generation boiler.
